Bernstein 618.9185.005 Technical Data

Technical Data

Mechanical data

Enclosure PA6 (glass fibre reinforced)
Cover PA6 (glass fibre reinforced)
Actuator Lever arm housing (Zn-DG), Lever (st), Roller (thermoplastic)
Ambient air temperature -25 °C … +70 °C (cable in fixed position)
Contact type Snap action, 1 NO, 1 NC (Zb)
Mechanical life 3 x 10
Switching frequency ≤ 30 / min.
Assembly 2 x M4 or 2 x M5
Connection Cable 4 x 0,75 mm²
Weight ≈ 0,20 kg
Installation position operator definable
Protection type IP67 acc. to IEC/EN 60529; DIN VDE 0470 T1

Actuation

Operating direction: from 2 sides
The actuating head can be turned in steps of 90° by lifting the clamp. This means that it can be approached from
8 different directions.

6

switching cycles

ID for safety engineering

B10d 6 x 106 cycles

Standards

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
DIN EN ISO 13849-1

EU Conformity

acc. to directive 2006/42/EC

Approvals

CSAUS A300, Q300

C

Notes

The indicated protection class (IP-code) is only valid when the actuator is correctly mounted.

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2016-06-30 and will not be removed in case of changes.

Page 2 of 2

6189185005 / 2355-16