Bernstein 618.8117.059 Technical Data

Technical Data

Mechanical data

Enclosure Thermoplastic, glass fibre reinforced (UL 94-V0)
Cover Thermoplastic, glass fibre reinforced (UL 94-V0)
Actuator Roller (thermoplastic)
Ambient air temperature -25 °C ... +80 °C
Contact type 1 NC, 1 NO (Zb)
Mechanical life 3 x 10
Switching frequency ≤ 100 / min.
Assembly 2 x M4 or 2 x M5 fixed position for safety applications
Connection Connector M12x1, A-coded
Weight ≈ 0,05 kg
Installation position operator definable
Protection type IP65 acc. to EN 60529

Actuation

The actuating device is preferably started from 2 sides.
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 2 actuation
directions are possible. The actuation assembly is to be again fastened to the housing using the 4 screws.

6

operating cycles

Standards

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1

EU Conformity

acc. to directive 2014/35/EU

Notes

The degrees of protection specified (IP code) applies only to a properly closed cover and the use of an equivalent
connector.
The connector and the cable (fix or flexible mounted) must at least be suitable for the described ambient air
temperatures.
The connector must not be connected or disconnected when voltage is applied.
The mechanical life of the connector is 500 connection cycles.

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2016-08-22 and will not be removed in case of changes.

Page 2 of 2

6188117059 / 2484-16