Bernstein 618.7118.102 Technical Data

Technical Data

Mechanical data

Enclosure Die-cast aluminium
Cover Sheet aluminium
Actuator roller (stainless steel)
Ambient air temperature -30 °C ... +80 °C
Contact type 1 N.C., 1 N.O. (Zb)
Mechanical life 10 x 10
Switching frequency ≤ 100 / min.
Assembly 4 x M5
Connection 4 screw connections (M3,5)

Conductor cross-sections

Cable entrance 1 x cable gland M20 x 1,5 (tightness-range 5 – 10 mm)
Weight ≈ 0,23 kg
Installation position operator definable
Protection type IP65 acc. to IEC/EN 60529

ID for safety engineering

B10d 20 x 106 cycles

6

operating cycles

Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²

Actuation

By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 4 actuation directions are
possible. The actuation assembly is to be again fastened to the housing using the 4 screws.

Standards

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
DIN EN ISO 13849-1

EU Conformity

acc. to directive 2014/35/EU

Approvals

CCC
UL

Notes

The degree of protection (IP code) specified applies only to a properly closed cover and in connection with the appropriate
cable gland.

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2017-01-20 and will not be removed in case of changes.

Page 2 of 2

6187118102 / 2059-17