Bernstein 618.6703.296 Technical Data

Technical Data

Plastic bodied limit switch

Mechanical data

Enclosure Thermoplastic, glass fibre reinforced (UL 94-V0), red
Cover Thermoplastic, glass fibre reinforced (UL 94-V0), black
Actuator Plunger (thermoplastic)
Ambient air temperature -30°C … +80°C
Contact type 1 NC (Y)
Mechanical life 10 x 106 switching cycles
Switching frequency ≤ 100/min
Assembly 2 x M4
Connection 2 screw connections (M3,5)
Conductor cross-sections Solid: 0,5 ... 1,5mm²
Litz wire with ferrules: 0,5 ... 1,5mm²
Cable entrance 1 x M20x1,5
Weight ≈ 0,06 kg
Installation position Operator definable
Protection type IP65 acc. to EN 60529; DIN VDE 0470 T1

ID for safety engineering

B10d

Actuation

The push bolt actuator is mainly intended to be actuated along its axis.
Side actuation will considerably reduce switch life.

Standards

VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1

EU Conformity

Approvals

Notes

The degree of protection specified (IP code) applies only to a properly closed cover and the use of an equivalent
cable gland with adequate cable.

20 x 106 switching cycles

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1

acc. to Directive 2006 / 95 / EC

CSA

C

A300 (same polarity)

US

This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of he actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!

Document : 6186703296_en.doc / Last update : 1 / 2109-12

Date of issue: 07.02.2012 / Page 2 of 2

Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica / www.bernstein.eu

Vorlage : 0850174281 Orig. 1