Bernstein 618.6171.427 Technical Data
Technical Data
Plastic Switch
Mechanical data
Enclosure Thermoplastic, glass fibre reinforced
Cover Thermoplastic, glass fibre reinforced
Actuator Lever with roller (thermoplastic)
Ambient air temperature -20°C … +80°C
Contact type 1 NC, 1 NO (Zb)
Mechanical life 10 x 106switching cycles
Switching frequency ≤ 100/min
Assembly 2 x M4
Connection 4 screw connections (M3,5)
Conductor cross-sections Solid: 0.5 ... 1.5mm²
Litz wire with ferrules: 0.5 ... 1.5mm²
Cable entrance cable gland M20x1,5 (clamping range 5 -10)
Weight ≈ 0,07kg
Installation position Operator definable
Protection type IP65 acc. to EN 60529; DIN VDE 0470 T1
Actuation
The actuating device is preferably started from 2 sides.
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 4 actuation
directions are possible.
The actuation assembly is to be again fastened to the housing using the 4 screws.
Standards VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EU Conformity
Approvals
CSA
C
US
Notes
The specified protection classification (IP code) applies only when the cover is closed and the appropriate cable
is used, in accordance with the clamping range of the above mentioned cable gland.
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible varia ions of the actual qualities from the quali ies described herein are explicitly excluded. All rights reserved. Specificati ons
subject to change without notice!
Document : 6186171453_en / Last update : 2 / 2849-05
Date of issue: 11.11.2005 / Page 2 of 2
Bernstein AG, Tieloser W eg 6, D-32457 Porta Westfalica / www.bernstein-ag.de
Vorlage : 0850174281 Orig. 1
Loading...