Bernstein 618.6167.273 Technical Data

Technical Data

Mechanical data

Enclosure Thermoplastic, glass fibre reinforced (UL 94-V0), black
Cover Thermoplastic, glass fibre reinforced (UL 94-V0), black
Actuator Roller (steel)
Ambient air temperature -30 °C ... +80 °C
Contact type 1 NC, 1 NO (Zb)
Mechanical life 1 x 10

6

operating cycles
Switching frequency ≤ 100 / min.
Assembly 2 x M4
Connection 4 screw connections (M3,5)

Conductor cross-sections

Solid: 0,5 ... 1,5 mm² or

Litz wire with ferrules: 0,5 ... 1,5 mm²
Cable entrance 1 x M20 x 1,5
Weight ≈ 0,07 kg
Installation position operator definable

Protection type IP65 acc. to IEC/EN 60529

Actuation

The actuating device is preferably started from 2 sides.
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 4 actuation
directions are possible.
The actuation assembly is to be again fastened to the housing using the 4 screws.

Standards

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1

VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1

EU Conformity

acc. to directive 2014/35/EU

Approvals

CSAUS A300 (same polarity)

C

Notes

The degree of protection specified (IP code) applies only to a properly closed cover and the use of an equivalent cable gland
with adequate cable.

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2016-05-12 and will not be removed in case of changes.

Page 2 of 2

6186167273 / 2270-16