Bernstein 618.6127.104 Technical Data

Technical Data

Mechanical data

Enclosure Thermoplastic, glass fibre reinforced (UL 94-V0), black
Cover Thermoplastic, glass fibre reinforced (UL 94-V0)
Actuator Lever with roller (thermoplastic)
Ambient air temperature -30 °C ... +80 °C
Contact type 1 NC wired (Zb)
Mechanical life 1 x 10
Switching frequency ≤ 100 / min.
Assembly 2 x M4
Connection AMP-plug
Weight ≈ 0,12 kg
Installation position operator definable
Protection type IP65 acc. to IEC/EN 60529

ID for safety engineering

B10d 2 x 106 cycles

Actuation

The actuating device is preferably started from 1 side.
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 4 actuation
directions are possible.
The actuation assembly is to be again fastened to the housing using the 4 screws.

6

operating cycles

Standards

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
DIN EN ISO 13849-1

EU Conformity

acc. to directive 2014/35/EU

Approvals

CSAUS A300 (same polarity)

C

Notes

The specified protection classification (IP code) applies only when the cover is closed.

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2016-05-11 and will not be removed in case of changes.

Page 2 of 2

6186127104 / 2265-16