Technical Data
Mechanical data
Enclosure Thermoplastic, glass fibre reinforced
Cover Thermoplastic, glass fibre reinforced
Actuator Lever arm housing, lever (st), roller (thermoplastic)
Ambient air temperature -30° C ... +80° C
Contact type 1 NC, 1 NO (Zb)
Mechanical life 10 x 10
Switching frequency ≤ 100 / min.
Assembly 2 x M4 / 2 x M5 / 2 x M3 front mounting
Connection 4 screw connections (M3,5)
Conductor cross-sections
Cable entrance 2 x M16 x 1,5
Weight ≈ 0,12 kg
Installation position operator definable
Protection type IP65 acc. to IEC/EN 60529
ID for safety engineering
B10d 20 x 10
6
operating cycles
Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²
6
switching cycles
Actuation
The actuating device is preferably started from 2 sides.
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 8 actuation
directions are possible.
The actuation assembly is to be again fastened to the housing using the 4 screws.
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
DIN EN ISO 13849-1
EU Conformity
acc. to directive 2006/95/EC
Approvals
A300, Q300
CSA
C
US
Notes
The degree of protection (IP code) specified applies solely to a property closed cover and the use of an equivalent
cable gland with adequate cable.
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2015-08-04 and will not be removed in case of changes.
Page 2 of 2
6185135101 / 2163-15
Loading...