Bernstein 618.1185.296 Technical Data

Technical Data

Mechanical data

Enclosure Thermoplastic, glass fibre reinforced (UL 94-V0)
Cover Thermoplastic, glass fibre reinforced (UL 94-V0)
Actuator Lever arm housing (Zn-die cast), lever (st), roller (thermoplastic)
Ambient air temperature -30 °C ... +80 °C
Contact type 1 N.C., 1 N.O. (Zb)
Mechanical life 10 x 10
Switching frequency ≤ 100 / min.
Assembly 4 x M5
Connection Plug M12 x 1, A-Code
Weight ≈ 0,22 kg
Installation position operator definable
Protection type IP65 acc. to EN 60529

Actuation

The actuating device is preferably started from 2 sides.
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 8 actuation directions are
possible. The actuation assembly is to be again fastened to the housing using the 4 screws.

6

operating cycles

ID for safety engineering

B10d 20 x 106 switching cycles

Standards

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
DIN EN ISO 13849-1

EU Conformity

acc. to directive 2006/95/EC

Approvals

CSAUS A300 (same polarity)

C

Notes

Cover locked with one-way screw.
The degree of protection specified (IP code) applies only to a properly closed cover and the use of an equivalent
cable gland with adequate cable.
For use with the described ambient temperature, the plug and cable (fixed or flexible installation) must be suitable
for at least the same temperature range.
The plug must not be connected and disconnected under voltage.
The mechanical life of the cable box are 500 cycle of operation.
To comply with the approvals need to use proper plugs and cables.

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2015-08-04 and will not be removed in case of changes.

Page 2 of 2

6181185296 / 2344-14