Bernstein 618.1135.096 Technical Data

Technical Data

Mechanical data

Enclosure Thermoplastic, glass fibre reinforced (UL 94-V0)
Cover Thermoplastic, glass fibre reinforced (UL 94-V0)
Actuator Turret head (Zn-die cast), lever (st), roller (thermoplastic)
Ambient air temperature -30 °C ... +80 °C
Contact type 1 NC, 1NO (Zb)
Mechanical life 10 x 10
Switching frequency ≤ 100 / min.
Assembly 2 x M4
Connection 4 screw connections (M3,5)

Conductor cross-sections

Cable entrance 1 x cable gland M20 x 1,5 (clamping range 5 – 10 mm),
Weight ≈ 0,24 kg
Installation position operator definable
Protection type IP65 acc. to IEC/EN 60529

Actuation

The actuating device is preferably started from 2 sides.
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 8 actuation directions are
possible.
The actuation assembly is to be again fastened to the housing using the 4 screws.

6

operating cycles

Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²

ID for safety engineering

B10d 20 x 106 cycles

Standards

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
DIN EN ISO 13849-1

EU Conformity

acc. to directive 2014/35/EU (Low-Voltage-Directive)

Approvals

A300 (same polarity)

CSA

C

US

Notes

The specified protection classification (IP code) applies only when the cover is closed and the appropriate cable
is used, in accordance with the clamping range of the above mentioned cable gland.

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2017-04-10 and will not be removed in case of changes.

Page 2 of 2

6181135096 / 2222-17