Bernstein 612.1137.694 Technical Data
Technical Data
Metal Switches
Series GC
Description
GC-U1 AD/1 180GR
Operating symbol
Operating diagram
right
Actuator
left
Ein Aus
Tolerances:
Operating point ± 3,5°;
Actuating force ± 10%
Actuating direction left
Electrical data
Rated insulation voltage U
Conv. thermal current I
Rated operational voltage U
400 VAC
i
10A
the
240V
e
Utilization category AC-15, Ue /Ie 240V/3A
Short-circuit protective device Fuse 10A gL/gG
Protection class
I
Article number
6121137694
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!
Document: 6121137694_en.doc / Last update: 1 / 2675-06
Date of issue: 27.09.2006 / Page 1 of 2
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica, Germany / www.bernstein-ag.de
Vorlage : 0850174282 Orig. 1
Technical Data
Metal Switches
Mechanical data
Enclosure Die-cast aluminium
Cover Sheet aluminium
Actuator Lever arm housing (Zn-DG)
Ambient air temperature -30°C ... +80°C
Contact type 1 NC, 1 NO
Mechanical life 10 x 106 operating cycles
Switching frequency ≤ 100 / min.
Assembly 2 x M4
Connection 4 screw terminals (M3.5)
Conductor cross-sections Solid: 0.5 ... 1.5mm²
Litz wire with ferrules: 0.5 ... 1.5mm²
Cable entrance 1 x M20x1.5
Weight ≈ 0,2 kg
Installation position Operator definable
Protection type IP65 acc. to IEC/EN 60529
Actuation
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 4 actuation
directions are possible. The actuation assembly is to be again fastened to the housing using the 4 screws.
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EU Conformity
CSA
Approvals
C
A300 (same polarity)
US
Notes
The specified protection classification (IP code) applies only when the cover is closed and the appropriate cable
is used, in accordance with the clamping range of the above mentioned cable gland.
This document will not become the contractual basis; the details included herein do not constitute any descriptions of expected conditions, so that warranties/claims
for defects on account of possible variations of the actual qualities from the qualities described herein are explicitly excluded. All rights reserved. Specifications
subject to change without notice!
Document: 6121137694_en.doc / Last update: 1 / 2675-06
Date of issue: 27.09.2006 / Page 2 of 2
Bernstein AG, Tieloser Weg 6, D-32457 Porta Westfalica, Germany / www.bernstein-ag.de
Vorlage : 0850174282 Orig. 1
Loading...