Technical Data
Metal bodied limit switch
Series ENM2
Description ENM2-E2 IW Article number 6087802021
Operating symbol
Operating diagram
Tolerance:
Operating Point ± 0,25 mm;
On Off
Operating force ± 10 %
Electrical Data
Rated insulation voltage U
Conv. thermal current I
Rated operational voltage U
Utilization category
250 V
i
10 A
the
240 V
e
AC-15, Ue/Ie 240 V / 3 A; 120 V / 6 A
DC-13, Ue/I
250 V / 0,27 A; 125 V / 0,55 A
e
Short-circuit protective device Fuse 6 A gG
Protection class
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2015-08-28 and will not be removed in case of changes.
I
Page 1 of 2
6087802021 / 2656-15
Technical Data
Mechanical data
Enclosure Die-cast aluminium
Cover Sheet aluminium
Actuator Plunger (st)
Ambient air temperature -30 °C ... +80 °C
Contact type 2 N.O. (Zb)
Mechanical life 3 x 10
Switching frequency ≤ 100 / min.
Assembly 4 x M5
Connection 4 screw connections (M3,5)
Conductor cross-sections
Cable entrance 1 x M20 x 1,5
Weight ≈ 0,20 kg
Installation position operator definable
Protection type IP65 acc. to EN 60529
Actuation
The push bolt actuator is mainly intended to be actuated along it’s axis.
Side actuation will considerably reduce switch life.
6
operating cycles
Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EU Conformity
acc. to directive 2006/95/EC
Approvals
CSAUS A300 (same polarity)
C
CCC
Notes
The degree of protection specified (IP code) applies only to a properly closed cover and the use of an equivalent
cable gland.
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2015-08-28 and will not be removed in case of changes.
Page 2 of 2
6087802021 / 2656-15