Bernstein 608.7600.038 Technical Data

Technical Data

Metal bodied limit switch

Series ENM2

Description ENM2-UV16Z O.BETG. Article number 6087600038

Operating symbol

Operating diagram

Tolerance:
Operating Point ± 0,25 mm;

On Off

Operating force ± 10 %

Electrical Data

Rated insulation voltage U
Conv. thermal current I
Rated operational voltage U
Utilization category AC-15, U

Direct opening action

250 V AC

i

5 A

the

240 V

e

240 V / 1,5 A

e/Ie

acc. to IEC/EN 60947-5-1, annex K

p

only when an appropriate actuating device is used
Short-circuit protective device Fuse 2 A gG
Protection class

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2018-04-19 and will not be removed in case of changes.

I

Page 1 of 2

6087600038 / 2264-18

Technical Data

Mechanical data

Enclosure Die-cast aluminium
Cover Sheet aluminium
Actuator without
Ambient air temperature -30 °C ... +80 °C
Contact type 1 N.C., 2 N.O. (Za)
Mechanical life 1 x 10
Switching frequency ≤ 100 / min.
Assembly 4 x M5
Connection 6 screw connections (M3,5)

Conductor cross-sections

Cable entrance 1 x M20 x 1,5
Weight ≈ 0,2 kg
Installation position operator definable
Protection type IP20 acc. to EN 60529

Standards

6

operating cycles

Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1

EU Conformity

acc. to directive 2014/35/EU (Low-Voltage-Directive)

Notes

The switch shall not be used as a mechanical stop.

BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2018-04-19 and will not be removed in case of changes.

Page 2 of 2

6087600038 / 2264-18