Technical Data
Plastic bodied limit switch
Series ENK
Description ENK-A2Z IW Article number 6081802327
Operating symbol
Operating diagram
Tolerance:
Operating Point ± 0,25 mm;
On Off
Operating torque ± 10 %
Electrical Data
Rated insulation voltage U
Conv. thermal current I
Rated operational voltage U
Utilization category AC-15, U
Direct opening action
400 V AC
i
5 A
the
240 V
e
240 V / 1,5 A
p
acc. to IEC/EN 60947-5-1, annex K
e/Ie
Short-circuit protective device Fuse 6 A gG
Protection class II, totally insulated
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2017-03-22 and will not be removed in case of changes.
Page 1 of 2
6081802327 / 2110-17
Technical Data
Mechanical data
Enclosure Thermoplastic, glass fibre reinforced
Cover Thermoplastic, glass fibre reinforced
Actuator Plunger (steel)
Ambient air temperature -30 °C ... +80 °C
Contact type 2 NC (Zb)
Mechanical life 1 x 10
Switching frequency ≤ 100 / min.
Assembly 4 x M5
Connection 4 screw connections (M3)
Conductor cross-sections
Cable entrance 1 x M20 x 1,5
Weight ≈ 0,15 kg
Installation position operator definable
Protection type IP65 acc. to EN 60529
Actuation
The push bolt actuator is mainly intended to be actuated along it’s axis.
Side actuation will considerably reduce switch life.
6
operating cycles
Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EU Conformity
acc. to directive 2014/35/EU
Approvals
CSAUS B300 (same polarity)
C
CCC
UL
Notes
The degree of protection (IP code) specified applies solely to a property closed cover and the use of an equivalent cable gland
with adequate cable.
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2017-03-22 and will not be removed in case of changes.
Page 2 of 2
6081802327 / 2110-17