Bernstein 608.1100.274 Technical Data

Technical Data
Plastic bodied limit switch
Series ENK
Description ENK-SU1Z O.BETG. Article number 6081100274
Operating diagram
Tolerance: Operating Point ± 0,25 mm;
On Off
Operating force ± 10 %
Electrical Data
Rated insulation voltage U Conv. thermal current I Rated operational voltage U Utilization category AC-15, U
Direct opening action
400 V AC
i
10 A
the
240 V
e
240 V / 3 A
e/Ie
acc. to IEC/EN 60947-5-1, annex K
p
only when an appropriate actuating device is used
Short-circuit protective device Fuse 2 A gG Protection class II, totally insulated
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2017-03-22 and will not be removed in case of changes.
Page 1 of 2
6081100274 / 2110-17
Technical Data
Mechanical data
Enclosure Thermoplastic, glass fibre reinforced (UL 94-V0) Cover Thermoplastic, glass fibre reinforced (UL 94-V0) Actuator without Ambient air temperature -30 °C ... +80 °C Contact type 1 NC, 1 NO (Zb) Mechanical life 10 x 10 Switching frequency ≤ 100 / min. Assembly 4 x M5 Connection 4 screw connections (M3,5)
Conductor cross-sections
Cable entrance 1 x M20 x 1,5 Weight ≈ 0,11 kg Installation position operator definable Protection type IP20 acc. to IEC/EN 60529
ID for safety engineering
B10d 20 x 106 cycles
6
operating cycles
Solid: 0,5 ... 1,5 mm² or Litz wire with ferrules: 0,5 ... 1,5 mm²
Standards
EU Conformity
Approvals
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1 VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1 DIN EN ISO 13849-1
acc. to directive 2014/35/EU
CCC
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2017-03-22 and will not be removed in case of changes.
Page 2 of 2
6081100274 / 2110-17
Loading...