Technical Data
Foot-switch
Series F1
Description F1-U2Z UN Article number 6061700004
Operating symbol
Electrical data
Rated insulation voltage U
Conv. thermal current I
Rated operational voltage U
Utilization category AC-15, U
Direct opening action
400 V AC
i
10 A
the
240 V
e
240 V /Ie 3 A, Ui 400 V
e
p
acc. to IEC/EN 60947-5-1, Annex K (pedal stop)
Short-circuit protective device Fuse 10 A gG
Protection class
I
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2015-07-30 and will not be removed in case of changes.
Page 1 of 2
6061700004 / 2657-13
Technical Data
Mechanical Data
Enclosure AL
Protective guard
(Accident protection cover UN)
Actuator Foot lever (PA)
Ambient air temperature –30 °C … +80 °C
Contact type 2 N.C. / 2 N.O. (Zb)
Operating force ≈ 10 N (pedal centre)
Mechanical life 10 x 10
Switching frequency ≤ 50/min
Assembly 2 x M8
Connection Screw connections (M3,5)
Number of connections 8
Protection ground 2 x M4
Conductor cross-sections
Cable entry size 3 x M20 x 1,5
Weight including protective guard ≈ 1,5 kg
Protection type IP 65 acc. to IEC/EN 60529
AL
6
switching cycles
Solid: 0,5 ... 1,5 mm²
Litz wire with ferrules: 0,5 ... 1,5 mm²
ID for safety engineering
B10d 20 x 10
6
switching cycles
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
DIN EN ISO 13849-1
EU Conformity
acc. to directive 2006/42/EC
Approvals
DGUV
CSAUS A300 (same polarity)
C
CCC
Notes
Tapped holes not in use must be closed with blind plugs. The degree of protection (IP code) specified applies only to a properly
closed accident protection cover and in connection with the appropriate cable glands or blind plugs.
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2015-07-30 and will not be removed in case of changes.
Page 2 of 2
6061700004 / 2657-13