Bernstein 602.2294.117 Technical Data

Technical Data

Metal bodied limit switch

Series GC

Description GC-SU2 LIW Article number 6022294117

Operating symbol

Operating diagram

Tolerance:
Operating point: ± 0,25 mm;

On Off

Actuating force: ±10 %

Electrical Data

Rated insulation voltage U
Conv. thermal current I
Rated operational voltage U
Utilization category AC-15, U

250 V AC

i

6 A

the

240 V

e

e/Ie

Short-circuit protective device Fuse 6 A gG
Protection class

I

240 V / 3 A

BERNSTEIN AG . Hans-Bernstein-Straße 1 .

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2018-01-16 and will not be removed in case of changes.

Page 1 of 2

6022294117 / 2093-17

Technical Data

Mechanical data

Enclosure Die-cast aluminium
Cover Sheet aluminium
Actuator Telescopic plunger (st)
Ambient air temperature -30 °C ... +80 °C
Contact type 2 NC, 2 NO (Za)
Mechanical life 3 x 10
Switching frequency ≤ 100 / min.
Assembly 2 x M4
Connection 6 screw connections (M3)

Conductor cross-sections

Cable entrance 1 x M20 x 1,5
Weight ≈ 0,22 kg
Installation position operator definable
Protection type IP65 acc. to IEC/EN 60529

Actuation

The push bolt actuator is mainly intended to be actuated along its axis.
Side actuation will considerably reduce switch life.

6

operating cycles

Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²

Standards

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1

EU Conformity

acc. to directive 2014/35/EU

Approvals

CCC

Notes

The degree of protection specified (IP code) applies only to a properly closed cover and the use of an equivalent cable gland
with adequate cable.

BERNSTEIN AG . Hans-Bernstein-Straße 1 .

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2018-01-16 and will not be removed in case of changes.

Page 2 of 2

6022294117 / 2093-17