Technical Data
Metal bodied limit switch
Series GC
Description GC-SU2 HIW Article number 6022270116
Operating symbol
Operating diagram
Tolerance:
Operating point ±0,25 mm;
On Off
Actuating force ±10 %
Electrical Data
Rated insulation voltage U
Conv. thermal current I
Rated operational voltage U
Utilization category AC-15, U
250 V AC
i
6 A
the
240 V
e
e
Short-circuit protective device Fuse 6 A gG
Protection class
I
≤
/ Ie 240 V / 3 A
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2018-01-16 and will not be removed in case of changes.
Page 1 of 2
6022270116 / 2093-17
Technical Data
Mechanical data
Enclosure Die-cast aluminium
Cover Sheet aluminium
Actuator Lever (sheet), roller (thermoplastic)
Ambient air temperature -30 °C ... +80 °C
Contact type 2 NC, 2 NO (Za)
Mechanical life 3 x 10
Switching frequency ≤ 100 / min.
Assembly 2 x M4
Connection 8 screw connections (M3)
Conductor cross-sections
Cable entrance 1 x M20 x 1,5
Weight ≈ 0,23 kg
Installation position operator definable
Protection type IP65 acc. to IEC/EN 60529
Actuation
By loosening the 4 screws the actuation assembly can be rotated in 90 degree increments such that 4 actuation directions are
possible. The actuation assembly is to be again fastened to the housing using the 4 screws.
6
operating cycles
Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
EU Conformity
acc. to directive 2014/35/EU (Low-Voltage-Directive)
Approvals
CCC
Notes
The degree of protection (IP code) specified applies solely to a property closed cover and the use of an
equivalent cable gland with adequate cable.
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2018-01-16 and will not be removed in case of changes.
Page 2 of 2
6022270116 / 2093-17