Bernstein 602.2200.413 Technical Data

Technical Data

Metal Switches

Series GC

Description GC-SU2 O.BETG. Article number 6022200413

Operating symbol

Operating diagram

Tolerance:
Operating Point ± 0,25 mm

On Off

Electrical Data

Rated insulation voltage U
Conv. thermal current I
Rated operational voltage U
Utilization category AC-15, U

250 V AC

i

6 A

the

240 V

e

/ Ie 240 V / 1,5 A

e

Short-circuit protective device Fuse 6 A gG
Protection class

BERNSTEIN AG . Hans-Bernstein-Straße 1 .

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2018-01-15 and will not be removed in case of changes.

I

Page 1 of 2

6022200413 / 2093-17

Technical Data

Mechanical data

Enclosure Die-cast aluminium
Cover Sheet aluminium
Actuator without
Ambient air temperature -30° C ... +80° C
Contact type 2NC, 2 NO
Mechanical life 3 x 10
Switching frequency ≤ 100 / min.
Assembly 2 x M4
Connection 8 screw connections (M3)

Conductor cross-sections

Cable entrance 1 x M20 x 1,5
Weight ≈ 0,19 kg
Installation position operator definable
Protection type IP20 acc. to IEC/EN 60529

Standards

6

operating cycles

Solid: 0,5 ... 1,5 mm² or
Litz wire with ferrules: 0,5 ... 1,5 mm²

VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1

EU Conformity

acc. to directive 2014/35/EU (Low-Voltage-Directive)

Approvals

CCC

Notes

The switch must not be used as a stop.
The degree of protection (IP code) specified applies solely to a property closed cover and the use of an
equivalent cable gland with adequate cable.

BERNSTEIN AG . Hans-Bernstein-Straße 1 .

Technical modifications and errors excepted.

The technical datasheet corresponds to the technical state as of 2018-01-15 and will not be removed in case of changes.

Page 2 of 2

6022200413 / 2093-17