Bernstein 601.6369.038 Technical Data

Technical Data
Safety switch
Series SEL – with separate actuator
Description SEL1-A1Z P Article number 6016369038
SEL1 A1Z P
actuator travel
actuating force
start of travel
end of travel
bush
spring plate
Screw project: 4 mm at mounted condition; including spring plate
Electrical Data
Conv. thermal current I Rated operational voltage U Rated operational current I Direct opening action Gap between NC-contacts
4 A
the
230 V AC; 200 V DC
e
2 A AC / DC
e
p
acc. to IEC/EN 60947-5-1, Annex K
DIN EN 81-20
Short-circuit protective device Fuse 6 A gG
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
Page 1 of 2
6016369038 / 2159-18
Technical Data
Mechanical data
Enclosure PC (UL 94-V0) transparent Cover PC (UL 94-V0) transparent Ambient air temperature -30 °C ... +70 °C Contact type 1 N.C. Mechanical life 10 x 10 Switching frequency ≤ 30 / min. Assembly Safety switch 2 x M4 thread rolling captive screws according to DIN 7500 Connection 2 screw connections (M3,5)
Conductor cross-sections
Weight ≈ 0,02 kg Installation position operator definable Protection type IP20 acc. to EN 60529
Standards
6
operating cycles
Solid: 0,5 ... 1,5 mm² or Litz wire with ferrules: 0,5 ... 1,5 mm²
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1 VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1 EN 81-1, EN 81-2, EN 81-20, EN 81-50
EU Conformity
acc. to directive 2014/35/EU (Low-Voltage-Directive)
Approvals
TÜV SÜD
CSA
C
US
ASME
CULUS
CCC
Notes
The centre of the misalignment between the P0 actuator and the switch add up to 3
-0.4
mm. The electrical data apply to the P0 actuator. Do not use switch as end stop.
Door switch to be used in elevator doors.
The switch must be so installed that the current-carrying metal parts can not be touched directly by hand! The cable entry must be covered by additional measures at the installation site.
BERNSTEIN AG . Hans-Bernstein-Straße 1 .
Technical modifications and errors excepted.
Page 2 of 2
6016369038 / 2159-18
Loading...