Berner MAX1030E User Manual

No.: DS-472

FDA

RECOMMENDED

Date: October, 2011

For Door Heights To 8’ (environmental separation)

STANDARD FEATURES

7 1/2” high •
1/5 hp direct driven motor(s) •
Factory installed “Intelliswitch” digital, programmable •
controller - see features below
Aluminum air directional vanes •
Clear anodized aluminum exterior cabinet •
Wall mounting plate and 1/4” threaded inserts for top •
mounting
Aluminum cross-flow blower wheels•
Two year parts warranty•
Crafted with Pride in the USA •

HEATER FEATURES

OPTIONAL FEATURES

MAXAIR

Electric

Data Sheet

Helical coil with point suspension of elements for •
longer life
Available single or three phase (not all models)•
Easily replaceable heating elements•
Galvanized steel frame•
Thermal protection against overheating•

Stainless steel or custom color finish•
Reduced kW available (consult factory)•

Lab Data

MODEL

Nozzle

Width (in)

Max FPM
at Nozzle

Max CFM
at Nozzle

CFM at

Nozzle

Avg.

Outlet

Vel.

(fpm)

Air

Volume

(scfm)

Power

Rating

(kW)

Outlet

Vel.

Unif. (%)

Motor(s)

@ hp

Electric

Capacity

(kW)

Temp

Rise

°F

Net

Wgt

(lbs)

MAX1030E 28.00 3100 914 731 1777 691 .18 89 1 @ 1/5 5.4 or 7.2 24 40.5

MAX1036E 35.25 3600 1465 1172 2118 1036 .32 92 1 @ 1/5 10 30 45.5

MAX1042E 41.25 3000 1370 1096 2115 1212 .32 93 1 @ 1/5 10 26 50

MAX1048E 47.25 2800 1805 1444 2104 1381 .32 94 1 @ 1/5 14.4 33 56

MAX1060E 59.00 3100 1950 1560 2052 1682 .32 95 1 @ 1/5 14.4 28 68.5

MAX1072E 72.50 3600 3026 2421 2118 2072 .32 95 1 @ 1/5 20 30 76.5

MAX2084E 84.25 3000 2740 2192 2115 2424 .64 93 2 @ 1/5 20 26 100

MAX2096E 96.25 2800 3610 2888 2104 2762 .64 94 2 @ 1/5 28.8 33 111.5

MAX2120E 119.75 3100 3901 3121 2046 3364 .64 95 2 @ 1/5 28.8 28 137

POWER SUPPLIES/MOTOR AMP DRAWS

Volts 120 208 240 110* 220*

Phase 1 1 1 1 1

Hertz 60 60 60 50 50

Amps per Motor 3.4 1.7 1.7 2.8 1.4

*Operation at 50 Hz will generate approximately a 17%
reduction in performance.

Sound level measured 10’ (3m) from the unit in free field:
1 & 2 motor(s): 54 dBA, 57 dBA

HEATER kW 208/1/60 240/1/60 208/3/60 240/3/60 480/3/60**

5.4 26.0 22.5 - - -

7.2 34.6 30.0

10.0 48.1 41.7 27.8 24.1 12.0

14.4 69.2* 60.0* 40.0 34.6 17.3

20.0 - - 55.5* 48.1* 24.1

28.8 - - 79.9* 69.3* 34.6

*Two circuits required.
** A separate 120/208 or 240 power supply required for motors.

HEATER kW/AMP DRAWS

Intelliswitch Features:

u Time Delay u Low Voltage Control Circuit
u 10 Speed Fan Slection u Time Clock
u On/Off/Auto Operation u LED Display
u Start/Stop Times u Lockable Display
u Thermostat

Berner reserves the right to alter specifications without prior notice.

Berner International Corporation New Castle, PA 16101 / USA / Telephone [phone] / FAX [phone] / www.berner.com / [e-mail]
MADE IN U.S.A. ©Copyright, 2011 Berner International Corporation