Berner ASD30078 User Manual

QTY Door Size Model # Standard Optional

30” x 78” ASD30078 ❑.080 ❑.120
30” x 84” ASD30084 ❑.080 ❑.120
30” x 90” ASD30090 ❑.080 ❑.120
30” x 96” ASD30096 ❑.080 ❑.120
30” x 102” ASD30102 ❑.080 ❑.120
30” x 108” ASD30108 ❑.080 ❑.120

QTY Door Size Model # Standard Optional

42” x 78” ASD42078 ❑.080 ❑.120
42” x 84” ASD42084 ❑.080 ❑.120
42” x 90” ASD42090 ❑.080 ❑.120
42” x 96” ASD42096 ❑.080 ❑.120
42” x 102” ASD42102 ❑.080 ❑.120
42” x 108” ASD42108 ❑.080 ❑.120

QTY Door Size Model # Standard Optional

54” x 78” ASD54078 ❑.080 ❑.120
54” x 84” ASD54084 ❑.080 ❑.120
54” x 90” ASD54090 ❑.080 ❑.120
54” x 96” ASD54096 ❑.080 ❑.120
54” x 102” ASD54102 ❑.080 ❑.120
54” x 108” ASD54108 ❑.080 ❑.120

36” x 78” ASD36078 ❑.080 ❑.120
36” x 84” ASD36084 ❑.080 ❑.120
36” x 90” ASD36090 ❑.080 ❑.120
36” x 96” ASD36096 ❑.080 ❑.120
36” x 102” ASD36102 ❑.080 ❑.120
36” x 108” ASD36108 ❑.080 ❑.120
” x ” ASD***** ❑.080 ❑.120

*****Maximum size available 60” x 108”, consult factory for model numbers on custom sizes.

QUALITY ASSURANCE

A. Manufacturer’s Qualifications: Artic Seal doors shall

be manufactured by firms regularly engaged in gen­erally accepted and documented Quality Assurance
Procedures, in the manufacturing of Artic Seal
doors, and whose products have been in satisfac-

FEATURES

A. Tear and abrasive resistant USDA low-temp pan-

els.

B. Built-in shim adjustment for quick installation and

centering of panels.

C. Adjustable door closure.

48” x 78” ASD48078 ❑.080 ❑.120
48” x 84” ASD48084 ❑.080 ❑.120
48” x 90” ASD48090 ❑.080 ❑.120
48” x 96” ASD48096 ❑.080 ❑.120
48” x 102” ASD48102 ❑.080 ❑.120
48” x 108” ASD48108 ❑.080 ❑.120
” x ” ASD***** ❑.080 ❑.120

tory use in similar service for not less than five (5)
years.

MANUFACTURER

OPTIONS

(Consult Factory)

A. Custom Colors, with vision strip or window.

A. Artic Seal doors to be furnished as factory as-

sembled units as manufactured by Berner Interna-

B. Wear resistant kick plates.

tional Corporation, New Castle, PA.

MATERIALS

A. Vinyl Panels: .080” low-temp (USDA) clear PVC

(.120” optional), including a non-curl reinforced heat
sealed loop on each panel.

B. Hardware: Noncorrosive 300 class polished stain-

less steel mounting brackets with stainless steel
cam roller and chrome vanadium compression
spring.

©Copyright, 2002 Berner International Corporation Printed In U.S.A.

MADE IN THE USA

111 Progress Avenue

New Castle • PA 16101

September 2001

DS-AS1

May 2002

60” x 78” ASD60078 ❑.080 ❑.120
60” x 84” ASD60084 ❑.080 ❑.120
60” x 90” ASD60090 ❑.080 ❑.120
60” x 96” ASD60096 ❑.080 ❑.120
60” x 102” ASD60102 ❑.080 ❑.120
60” x 108” ASD60108 ❑.080 ❑.120
” x ” ASD***** ❑.080 ❑.120

INSTALLATION

A. Install Artic Seal door mounting bracket flush with

door jamb.

B. If tapping strip is provided for support use self drill-

ing screws.

C. If suitable support is not provided door must be

through-bolted.

WARRANTY

A. 1 year parts warranty for manufacturers defects.

Lifetime rustproof warranty replacement.

PROJECT

LOCATION

CONSUL TANT

DA TE

1-800-343-7991 • 724-658-3551

Fax [phone]

www.berner.com • [e-mail]

ARTIC SEAL

Swinging Doors

for cooler and freezer doors to -30º

OPENING MEASUREMENTS

WIDTH (in inches) _________________________
HEIGHT (in inches) ________________________

NOTES

1. If tapping strips or sufficient structure
is provided by walk-in manufacturer
use suitable self-drilling screws.

2. For through-bolt mounting, use 5/16”

or 3/8” bolts.