Page 1
Q-Gun™ Series
USA
Made with
Pride and without
Compromise in the
150 Amp MIG Guns
Q150 MIG Q-GunTM shown with
curved handle, medium 45˚
rotating neck.
Issued Nov. 2006 • Index No. SPEC Q150-1.4
All Guns are Not Created Equal.
A MIG gun should be durable, easy to
use and customized to your specific
application. Our MIG guns put you in
control: you choose the options you need
and we'll build a gun to last. We even
ship most of our guns within 24 hours.
Lightweight, comfortable and
easy-to-use. Our Q150 MIG gun
is a perfect fit for low amperage
industrial applications.
Centerfire
are easy-to-use and high performing - they
provide better arc starts, less spatter and more
consistent welds - and also last up to three times
longer than competitive brands.
Necks available in fixed, rotatable and multiple
length options for optimal weld accessibility and
improved operator comfort. Rotatable necks
changeover without tools.
Patented Jump Liner allows quick neck change
and replacement of only most commonly worn or
clogged liner area, which reduces the amount of
time a gun is offline and minimizes inventory.
Liners coiled in-house with proprietary process
that improves wire feed performance and 100
percent tested to ensure smoothest wire feed in
the industry.
Handle is comfortable to reduce user fatigue and
ventilated to reduce heat.
Back end with durable rigid strain relief and
easily interchangeable direct plugs and trigger
leads connect to wire feeders and machines
from major manufacturers and allow simple
maintenance.
TM
contact tips, nozzles and diffusers
Q150 Amperage Ratings
Duty Cycle Description
100% NEMA 100%CE 60% CE 35%CE
160 150 180 225 CO2 Gas
n/a 140 150 180 80%AR20%CO
Bernard
An Illinois Tool Works Company
449 West Corning Road, Box 667
Beecher, Illinois 60401 USA
®
Phone: 800-946-2281 (US Only) 708-946-2281 (Outside US)
Fax: 708-946-6726
For more information, visit us at BernardWelds.com
2
Page 2
AMP
1
2
4
5
6
7
8
9
10
11
12
14
15
16
13
3
16
17
17
18
18
19
20
Replacement Parts List
ITEM # PART # DESCRIPTION
1 See Centerfire Spec Sheet Nozzle Assy
2 See Centerfire Spec Sheet Contact Tip
3 See Centerfire Spec Sheet Gas Diffuser
4 See Centerfire Spec Sheet Cap
5 See Neck Spec Sheet Neck
6 See Jump Liner Spec Sheet Jump Liner
7 2660001 Terminal, Quick Disconnect (2 req’d)
8 1780062 Handle Half, Upper
9 2620054 Switch Assy, Handle Half, Lower
10 4207 Post Fastener (2 Req'd)
11 4209 Handle Screw (2 Req'd)
12 1880194 Handle Kit - (Includes: (1) #8, (1) #9,
(2) #10, (2) #11)
13 4932 Butt Connector (2 Req'd)
14 2520007 Cap, Rigid Strain Relief
15 2520048 Spring, Strain Relief
16 Rigid Strain Relief
2520073 Strain Relief with Installed Gas Pin
(Bernard Direct Plug)
2520047 Strain Relief (Euro Direct Plug)
2520047E Strain Relief with Trigger Cable
Adapter (OXO, Tweco 4 w/Twist Lock)
2520047H Strain Relief with Trigger Cable
Adapter (L-Tec, Hobart Direct Plug)
2520047L Strain Relief with Trigger Cable
Adapter (Lincoln Direct Plug)
2520047T Strain Relief with Trigger Cable
Adapter (National, Tweco Direct Plug)
2520047M Strain Relief with Trigger Cable
Adapter (All Other Direct Plugs)
17 See Direct Plug Spec Sheet Direct Plug Components
18 See Liner Spec Sheet Liner
19 1010027 Adapter Block (Not Req'd on Bernard
or Euro Direct Plug)
20 W11127-002 Screw, Strain Relief (Not Req'd on
Bernard Direct Plug)
©2008 Bernard Printed in U.S.A.
Loading...