product sheet
6765106089
Socket outlet with earthing pin and LED orientation light enhanced contact protection, Screw-in lift
terminals, Berker Q.1/Q.3/Q.7/Q.9, polar white velvety
Technical features
Architecture
- 2pole + earth
Main electrical features
6765106089
Nominal voltage 250 V
Rated current 16 A
Rated voltage 250 V AC
Power
Power consumption 0.25 W/0.35 VA
Cover, door
- Central cover plate
Detection
- integrated brightness sensor that switches the orientation light on at twilight and off when there is
sufficient brightness
Materials
RAL colour RAL 9010 - Pure white
Colour of design line polar white
Colour white
Colour polarwhite
Material thermoplastic
Surface appearance velvety
Dimensions
Insertion depth 32 mm
Lighting control
Light intensity (white) 0,2 cd
Switch-off brightness ≈ 4 lx
Switch-on brightness ≈ 2 lx
LED control
- long service life of the LED
- white LED light
Installation, mounting
- with spreader claws
Technical subject to change
product sheet
6765106089
Connection
Conductor cross-section (rigid) max. 2,5 mm²
Connection terminals according to IEC 60884-1
- with screw-in lift terminals
Cable
- through-wiring possible, therefore also ideal for retrofitting
Equipment
- additional benefit by combination of a socket outlet with an orientation light
Use
- enhanced contact protection
- Screw-in lift terminals
Safety
IK protection code against mecanical impacts 05
Enhanced contact protection (child protection) according to IEC 60884-1
- Enhanced contact protection
Identification
Main design line Berker Q.1/Q.3/Q.7/Q.9
Secondary design line(s) Berker Q.1, Berker Q.3
Instructions
- Caution!
Items with special flush-mounted insert.
Centre plates with LED orientation lights are not compatible with the standard socket outlets.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...