product sheet
6765106082
Socket outlet with earthing pin and LED orientation light enhanced contact protection, Screw-in lift
terminals, Berker Q.1/Q.3/Q.7/Q.9
Technical features
Architecture
- 2pole + earth
Main electrical features
6765106082
Rated current 16 A
Rated voltage 250 V AC
Power
Power consumption 0.25 W/0.35 VA
Detection
- integrated brightness sensor that switches the orientation light on at twilight and off when there is
sufficient brightness
Materials
Colour of design line white
Lighting control
Light intensity (white) 0,2 cd
Switch-off brightness ≈ 4 lx
Switch-on brightness ≈ 2 lx
LED control
- long service life of the LED
- white LED light
Connection
Conductor cross-section (rigid) max. 2,5 mm²
Connection terminals according to IEC 60884-1
- with screw-in lift terminals
Cable
- through-wiring possible, therefore also ideal for retrofitting
Equipment
- additional benefit by combination of a socket outlet with an orientation light
Use
- enhanced contact protection
- Screw-in lift terminals
Safety
IK protection code against mecanical impacts 05
Enhanced contact protection (child protection) according to IEC 60884-1
- Enhanced contact protection
Technical subject to change
product sheet
6765106082
Identification
Main design line Berker Q.1/Q.3/Q.7/Q.9
Secondary design line(s) Berker Q.1, Berker Q.3
Instructions
- Caution!
Items with special flush-mounted insert.
Centre plates with LED orientation lights are not compatible with the standard socket outlets.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...