Page 1
product sheet
6765101606
Socket outlet with earthing pin and LED orientation light enhanced contact protection, Screw-in lift
terminals, Berker S.1/B.3/B.7, anthracite, matt
Technical features
Architecture
- 2pole + earth
Main electrical features
6765101606
Nominal voltage 250 V
Rated current 16 A
Rated voltage 250 V AC
Power
Power consumption 0.25 W/0.35 VA
Cover, door
- Central cover plate
Detection
- integrated brightness sensor that switches the orientation light on at twilight and off when there is
sufficient brightness
Materials
RAL colour RAL 7021 - Black grey
Colour of design line anthracite
Colour anthracite charcoal grey
Colour anthracite
Material thermoplastic
Surface appearance matt
Dimensions
Insertion depth 32 mm
Lighting control
Light intensity (white) 0,2 cd
Switch-off brightness ≈ 4 lx
Switch-on brightness ≈ 2 lx
LED control
- long service life of the LED
- white LED light
Installation, mounting
- with spreader claws
Technical subject to change
Page 2
product sheet
6765101606
Connection
Conductor cross-section (rigid) max. 2,5 mm²
Connection terminals according to IEC 60884-1
- with screw-in lift terminals
Cable
- through-wiring possible, therefore also ideal for retrofitting
Equipment
- additional benefit by combination of a socket outlet with an orientation light
Use
- enhanced contact protection
- Screw-in lift terminals
Safety
IK protection code against mecanical impacts 05
Enhanced contact protection (child protection) according to IEC 60884-1
- Enhanced contact protection
Identification
Main design line Berker S.1/B.3/B.7
Secondary design line(s) Berker B.7, Berker B.3, Berker B.1
Instructions
- Caution!
Items with special flush-mounted insert.
Centre plates with LED orientation lights are not compatible with the standard socket outlets.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...