product sheet
50763555
Push-button, change-over contact surface-mounted with labelling field - illuminated, Berker W.1,
grey/light grey matt
Technical features
Main electrical features
Rated voltage 250 V AC
Electric current
50763555
Momentary-contact current 10 A
Materials
RAL colour RAL 7011 - Iron grey
Colour of design line grey/light grey
Colour dark grey
Material thermoplastic
Surface appearance matt
Dimensions
Height 76 mm
Width 62 mm
Labelling field (W x H) 50 x 16 mm
Connection
- with Wago clip-in 2-wire connection terminal for wiring
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with N-terminal
- with plug-in terminals
Cable
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with {\b blue} 230 V LED unit
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Use
- with labelling field - illuminated
Safety
Protection index IP IP55
Use conditions
Operating temperature -40 … 30 °C
Storage/transport temperature -50 … 50 °C
Identification
Application, usage Surface-mounted wet-room installation
Main design line Berker W.1
Technical subject to change
product sheet
50763555
Instructions
- Pins of quick-release lock made of ZAMAK
- For labelling with name, information notice, etc.
- Labelling field height arranged for P-touch strips 12 mm.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...