Page 1
product sheet
50763552
Push-button, change-over contact surface-mounted with labelling field - illuminated, Berker W.1, polar
white matt
Technical features
Main electrical features
Nominal voltage 250 V
Rated voltage 250 V AC
50763552
Electric current
Momentary-contact current 10 A
Materials
RAL colour RAL 9010 - Pure white
Colour of design line polar white
Colour white
Colour polarwhite
Material thermoplastic
Surface appearance matt
Dimensions
Height 76 mm
Width 62 mm
Labelling field (W x H) 50 x 16 mm
Installation, mounting
- for screw fastening
Connection
- with Wago clip-in 2-wire connection terminal for wiring
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with N-terminal
- with plug-in terminals
Cable
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with {\b blue} 230 V LED unit
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Use
- with labelling field - illuminated
Safety
Protection index IP IP55
Use conditions
Operating temperature -40 … 30 °C
Storage/transport temperature -50 … 50 °C
Technical subject to change
Page 2
product sheet
50763552
Identification
Application, usage Surface-mounted wet-room installation
Main design line Berker W.1
Instructions
- Labelling field height arranged for P-touch strips 12 mm.
- Labelling fields with imprinted symbol for light, bell and door opener enclosed
- Pins of quick-release lock made of ZAMAK
- For labelling with name, information notice, etc.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...