product sheet
50753535
50753535
Blind series push-button with imprinted symbol arrow surface-mounted Berker W.1
Technical features
Architecture
Type of control unit double rocker
Configuration
- with mechanical and electrical interlock to prevent mutual activation
Main electrical features
Nominal voltage 250 V
Rated voltage 250 V AC
Electric current
Momentary-contact current 10 A
Materials
RAL colour RAL 7011 - Iron grey
Colour of design line grey/light grey
Colour dark grey
Colour light grey
Material thermoplastic
Surface appearance matt
Dimensions
Depth 32 mm
Height 75 mm
Width 75 mm
Installation, mounting
- for screw fastening
Connection
- with Wago clip-in 2-wire connection terminal for wiring
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with plug-in terminals
Cable
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Safety
Protection index IP IP55
Technical subject to change
product sheet
50753535
Use conditions
Operating temperature -40 … 30 °C
Storage/transport temperature -50 … 50 °C
Identification
Application, usage Surface-mounted wet-room installation
Main design line Berker W.1
Instructions
- Pins of quick-release lock made of ZAMAK
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...