Page 1
product sheet
50753502
50753502
Blind series push-button with imprinted symbol arrow surface-mounted Berker W.1, polar white matt
Technical features
Configuration
- with mechanical and electrical interlock to prevent mutual activation
Main electrical features
Nominal voltage 250 V
Rated voltage 250 V AC
Electric current
Momentary-contact current 10 A
Materials
RAL colour RAL 9010 - Pure white
Colour of design line polar white
Colour polarwhite
Material thermoplastic
Surface appearance matt
Installation, mounting
- for screw fastening
Connection
- with Wago clip-in 2-wire connection terminal for wiring
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with plug-in terminals
Cable
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Safety
Protection index IP IP55
Use conditions
Operating temperature -40 … 30 °C
Storage/transport temperature -50 … 50 °C
Powered by TCPDF (www.tcpdf.org)
Identification
Application, usage Surface-mounted wet-room installation
Main design line Berker W.1
Instructions
- Pins of quick-release lock made of ZAMAK
Technical subject to change
Loading...