product sheet
50463522
Push-button insert, change-over contact, illuminated surface-mounted/flush-mounted with lens, Berker
W.1, polar white matt
Technical features
Architecture
Type of control unit rocker
Main electrical features
50463522
Nominal voltage 250 V
Rated voltage 250 V AC
Electric current
Momentary-contact current 10 A
Materials
RAL colour RAL 9010 - Pure white
Colour of design line polar white
Colour white
Colour polarwhite
Material thermoplastic
Surface appearance matt
Dimensions
Depth 42 mm
Height 71 mm
Width 71 mm
Installation, mounting
- for screw fastening
Connection
- with plug-in terminals
- with N-terminal
Equipment
- with {\b blue} 230 V LED unit
- for lighting and monitoring circuit
Use
- with lens
Safety
Protection index IP IP55
Use conditions
Operating temperature -40 … 30 °C
Technical subject to change
product sheet
50463522
Identification
Application, usage Surface-mounted wet-room installation
Main design line Berker W.1
Instructions
- Pins of quick-release lock made of ZAMAK
- Inserts will only reach the degree of protection IP55 if mounted with a housing surface mounted or
frame for flush-mounted installation.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...