product sheet
50453525
50453525
Push-button, NO contact surface-mounted Berker W.1
Technical features
Architecture
Type of control unit single rocker
Main electrical features
Nominal voltage 250 V
Rated voltage 250 V AC
Electric current
Momentary-contact current 10 A
Materials
RAL colour RAL 7011 - Iron grey
Colour of design line grey
Colour dark grey
Colour light grey
Material Plastic/metal
Surface appearance matt
Installation, mounting
- for screw fastening
Connection
- with Wago clip-in 2-wire connection terminal for wiring
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with plug-in terminals
Cable
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Safety
Protection index IP IP55
Use conditions
Operating temperature -40 … 30 °C
Storage/transport temperature -50 … 50 °C
Powered by TCPDF (www.tcpdf.org)
Identification
Main design line Berker W.1
Instructions
- Pins of quick-release lock made of ZAMAK
- Inserts will only reach the degree of protection IP55 if mounted with a housing surface mounted or
frame for flush-mounted installation.
Technical subject to change
Loading...