Berker 47843532 User Manual

Page 1
product sheet
47843532
SCHUKO socket outlet 2gang horizontal with hinged cover surface-mounted with enhanced touch protection, Berker W.1, polar white matt
Technical features
Architecture
Design according to DIN 49440 Technical version 2 cable entries
47843532
Nominal voltage 250 V Rated current 16 A Rated voltage 250 V AC
Cover, door
- with hinged cover that falls back, manual clip-in
- Complete housing
Materials
RAL colour RAL 9010 - Pure white Colour of design line polar white Colour white Material thermoplastic Surface appearance matt
Connection
Conductor cross-section 1 … 2,5 mm² Connection terminals according to IEC 60884-1 Connection terminals according to VDE 0620-1
- with plug-in terminals
Cable
- inserts wired-through
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Use
- with enhanced touch protection
Safety
Protection index IP IP55 IK protection code against mecanical impacts 05 Enhanced contact protection (child protection) according to IEC 60884-1 Enhanced contact protection (child protection) according to VDE 0620-1
- Enhanced contact protection
Technical subject to change
Page 2
product sheet
47843532
Use conditions
Operating temperature -40 … 30 °C Storage/transport temperature -50 … 50 °C
Identification
Application, usage Surface-mounted wet-room installation Main design line Berker W.1
Instructions
- Hinged cover springs made of stainless steel, pins of quick-release lock made of ZAMAK
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...