Berker 47843512 User Manual

product sheet
47843512
47843512
SCHUKO socket outlet 2gang horizontal with hinged cover surface-mounted Berker W.1, polar white matt
Technical features
Architecture
Design according to DIN 49440 Technical version 2 cable entries
Main electrical features
Nominal voltage 250 V Rated current 16 A Rated voltage 250 V AC
- with hinged cover that falls back, manual clip-in
- Complete housing
Materials
RAL colour RAL 9010 - Pure white Colour of design line polar white Colour white Colour polarwhite Material thermoplastic Surface appearance matt
Installation, mounting
- for horizontal mounting
- for screw fastening
Connection
Conductor cross-section 1 … 2,5 mm² Connection terminals according to IEC 60884-1 Connection terminals according to VDE 0620-1
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with Wago clip-in 2-wire connection terminal for wiring
- with plug-in terminals
Cable
- inserts wired-through
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Safety
Protection index IP IP55 IK protection code against mecanical impacts 05
- without enhanced contact protection
Technical subject to change
product sheet
47843512
Use conditions
Operating temperature -40 … 30 °C Storage/transport temperature -50 … 50 °C
Identification
Application, usage Surface-mounted wet-room installation Main design line Berker W.1
Instructions
- Hinged cover springs made of stainless steel, pins of quick-release lock made of ZAMAK
- The upper and lower entry for cables are laterally offset and therefore particularly suitable for mounting beside door frame or the like
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...