Berker 47403512 User Manual

product sheet
47403512
47403512
SCHUKO socket outlet with hinged cover surface-mounted Berker W.1, polar white matt
Technical features
Architecture
Design according to DIN 49440
Main electrical features
Nominal voltage 250 V Rated current 16 A Rated voltage 250 V AC
- with hinged cover that falls back, manual clip-in
- Complete housing
Materials
RAL colour RAL 9010 - Pure white Colour of design line polar white Colour white Colour polarwhite Material thermoplastic Surface appearance matt
Installation, mounting
- for screw fastening
Connection
Connection terminals according to IEC 60884-1 Connection terminals according to VDE 0620-1
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with Wago clip-in 2-wire connection terminal for wiring
- with plug-in terminals
Cable
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Safety
Protection index IP IP55 IK protection code against mecanical impacts 05
- without enhanced contact protection
Use conditions
Operating temperature -40 … 30 °C Storage/transport temperature -50 … 50 °C
Technical subject to change
product sheet
47403512
Identification
Application, usage Surface-mounted wet-room installation Main design line Berker W.1
Instructions
- Hinged cover springs made of stainless steel, pins of quick-release lock made of ZAMAK
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...