product sheet
42273515
42273515
Mechanical timer 15 min surface-mounted with setting knob, Berker W.1
Technical features
Configuration
- NO contact
Main electrical features
Rated voltage 250 V AC
Electric current
Switching current 10 AX
Materials
RAL colour RAL 7042 - Traffic grey A
Colour of design line grey/light grey
Colour dark grey
Colour light grey
Surface appearance matt
Connection
Conductor cross-section 2 x 1 … 2,5 mm²
- Wago clip-in 3-wire connection terminal for wiring
- with screw terminals
Cable
- with cable entry at top and bottom
Settings
Teachable running time 25 s … 15 mn
Use
- with setting knob
Safety
Protection index IP IP55
Use conditions
Operating temperature -40 … 30 °C
Storage/transport temperature -50 … 50 °C
Powered by TCPDF (www.tcpdf.org)
Identification
Application, usage Surface-mounted wet-room installation
Main design line Berker W.1
Instructions
- Housing screws made of stainless steel.
Technical subject to change
Loading...