product sheet
41096086
SCHUKO socket outlet with LED orientation light enhanced contact protection, Screw-in lift terminals,
Berker Q.1/Q.3/Q.7/Q.9, anthracite velvety, lacquered
Technical features
Architecture
Design according to DIN 49440
Main electrical features
41096086
Nominal voltage 250 V
Rated current 16 A
Rated voltage 250 V AC
Power
Power consumption 0.25 W/0.35 VA
Cover, door
- Central cover plate
Detection
- integrated brightness sensor that switches the orientation light on at twilight and off when there is
sufficient brightness
Materials
RAL colour RAL 7021 - Black grey
Colour of design line anthracite
Colour anthracite charcoal grey
Colour anthracite
Material / workmanship lacquered
Material thermoplastic
Surface appearance velvety
Dimensions
Insertion depth 32 mm
Lighting control
Light intensity (white) 0,2 cd
Switch-off brightness ≈ 4 lx
Switch-on brightness ≈ 2 lx
LED control
- white LED light
- long service life of the LED
Installation, mounting
- with spreader claws
Technical subject to change
product sheet
41096086
Connection
Conductor cross-section (rigid) max. 2,5 mm²
Connection terminals according to IEC 60884-1
Connection terminals according to VDE 0620-1
- with screw-in lift terminals
Cable
- through-wiring possible, therefore also ideal for retrofitting
Equipment
- additional benefit by combination of a socket outlet with an orientation light
Use
- enhanced contact protection
- Screw-in lift terminals
Safety
Protection index IP IP20
IK protection code against mecanical impacts 05
Enhanced contact protection (child protection) according to IEC 60884-1
Enhanced contact protection (child protection) according to VDE 0620-1
- Enhanced contact protection
Identification
Main design line Berker Q.1/Q.3/Q.7/Q.9
Secondary design line(s) Berker Q.3, Berker Q.1
Instructions
- Caution!
Items with special flush-mounted insert.
Centre plates with LED orientation lights are not compatible with the standard socket outlets.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...