Page 1
product sheet
30863535
Change-over switch insert with rocker surface-mounted/flush-mounted with labelling field - illuminated,
Berker W.1, grey matt
Technical features
Architecture
Type of control unit single rocker
Main electrical features
30863535
Nominal voltage 250 V
Rated voltage 250 V AC
Electric current
Switching current 10 AX
Materials
RAL colour RAL 7011 - Iron grey
Colour of design line grey
Colour dark grey
Material thermoplastic
Surface appearance matt
Dimensions
Depth 42 mm
Height 70 mm
Width 70 mm
Labelling field (W x H) 50 x 16 mm
Installation, mounting
- for screw fastening
Connection
Type of connection Quickconnect
- Wago clip-in 3-wire connection terminal for wiring
- with N-terminal
- with plug-in terminals
Cable
- with cable entry at top and bottom
Equipment
- for illumination
- with {\b blue} 230 V LED unit
Use
- with labelling field - illuminated
Safety
Protection index IP IP55
Technical subject to change
Page 2
product sheet
30863535
Use conditions
Operating temperature -40 … 30 °C
Storage/transport temperature -50 … 50 °C
Identification
Application, usage Surface-mounted wet-room installation
Main design line Berker W.1
Instructions
- Pins of quick-release lock made of ZAMAK
- For labelling with name, information notice, etc.
- Labelling field height arranged for P-touch strips 12 mm.
- Inserts will only reach the degree of protection IP55 if mounted with a housing surface mounted or
frame for flush-mounted installation.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...