Page 1
product sheet
30863512
Control change-over switch insert, rocker surface-mounted/flush-mounted with lens, Berker W.1, polar
white matt
Technical features
Architecture
Type of control unit single rocker
Main electrical features
30863512
Nominal voltage 250 V
Rated voltage 250 V AC
Electric current
Switching current 10 AX
Materials
RAL colour RAL 9010 - Pure white
Colour of design line polar white
Colour white
Material thermoplastic
Surface appearance matt
Dimensions
Depth 42 mm
Height 70 mm
Width 70 mm
Installation, mounting
- for screw fastening
Connection
Type of connection Quickconnect
- with plug-in terminals
- with N-terminal
Cable
- with cable entry at top and bottom
Equipment
- with {\b red} 230 V LED unit
- for monitoring circuit
Use
- with lens
Safety
Protection index IP IP55
Technical subject to change
Page 2
product sheet
30863512
Use conditions
Operating temperature -40 … 30 °C
Storage/transport temperature -50 … 50 °C
Identification
Main design line Berker W.1
Instructions
- Pins of quick-release lock made of ZAMAK
- Inserts will only reach the degree of protection IP55 if mounted with a housing surface mounted or
frame for flush-mounted installation.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...