Berker 30763555 User Manual

Page 1
product sheet
30763555
30763555
Change-over switch surface-mounted with labelling field - illuminated, Berker W.1, grey/light grey matt
Technical features
Main electrical features
Nominal voltage 250 V Rated voltage 250 V AC
Electric current
Switching current 10 AX
Colour of design line grey/light grey Material thermoplastic Surface appearance matt
Dimensions
Depth 61,5 mm Height 16 mm Width 50 mm Labelling field (W x H) 50 x 16 mm
Connection
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with Wago clip-in 2-wire connection terminal for wiring
- with N-terminal
- with plug-in terminals
Cable
- with one entry for 2 cables and one entry for cable and tube
Equipment
- for illumination
- with {\b blue} 230 V LED unit
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Use
- with labelling field - illuminated
Powered by TCPDF (www.tcpdf.org)
Use conditions
Operating temperature -40 … 30 °C Storage/transport temperature -50 … 50 °C
Identification
Application, usage Surface-mounted wet-room installation Main design line Berker W.1
Instructions
- Pins of quick-release lock made of ZAMAK
- For labelling with name, information notice, etc.
- Labelling field height arranged for P-touch strips 12 mm.
Technical subject to change
Loading...