Berker 30723502 User Manual

Page 1
product sheet
30723502
30723502
On/off switch 2pole with imprint "0" and "I" surface-mounted Berker W.1, polar white matt
Technical features
Architecture
Type of control unit single rocker
Configuration
Connectivity
- with mechanical encoding of rocker mount, that allows only one correct positioning of the rocker on the insert
Main electrical features
Nominal voltage 250 V Rated voltage 250 V AC
Electric current
Switching current 10 AX
Materials
RAL colour RAL 9010 - Pure white Colour of design line polar white Colour white Material thermoplastic Surface appearance matt
Dimensions
Depth 61,5 mm Height 76 mm Width 76 mm
Installation, mounting
- for screw fastening
Connection
Type of connection Quickconnect
- with Wago clip-in 2-wire connection terminal for wiring
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with N-terminal
- with plug-in terminals
Cable
- with one entry for 2 cables and one entry for cable and tube
Equipment
- with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Technical subject to change
Page 2
product sheet
30723502
Safety
Protection index IP IP55
Use conditions
Operating temperature -40 … 30 °C Storage/transport temperature -50 … 50 °C
Identification
Application, usage Surface-mounted wet-room installation Main design line Berker W.1
Instructions
- Pins of quick-release lock made of ZAMAK
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...