Berker 3036 User Manual

Page 1
product sheet
3036
3036
Change-over switch Light control
Technical features
Architecture
Type of control unit single rocker
Configuration
Controls and indicators
- No
Main electrical features
Nominal voltage 250 V Rated voltage 250 V AC
Electric current
Switching current 10 AX
Materials
Material Plastic/metal Surface appearance matt
Dimensions
Depth 42 mm Insertion depth 31 mm Height 71 mm Width 71 mm
Installation, mounting
- with spreader claws
- for screw fastening
Connection
Connection terminals according to IEC 60669-1 Connection terminals according to VDE 0632-1 Type of connection Quickconnect
- with plug-in terminals
Equipment
Switching angle 3,5 °
- for lighting and monitoring circuit
Safety
Protection index IP IP20
Technical subject to change
Page 2
product sheet
3036
Identification
Application, usage HVAC control, Light control Main design line Light control Appliance switch type No
Instructions
- A control change-over switch is shown here as an example. With 2-pole and 3-pole control on/off switches, other rocker switches and neon lamp units are required.
Powered by TCPDF (www.tcpdf.org)
Technical subject to change
Loading...