Benq V5010i Quick Start Guide

IMPORTANT

To install the product properly,

you are strongly recommended

to follow the steps and safety

precautions in this document.

How-to video

Safety precautions Getting started Screen assembly Screen mounting

Installation guide

Digital Projector

Installation Guide

Ambient Light Rejecting Screen | SNS21

1

V 1.00

Safety precautions Getting started Screen assembly Screen mounting

K

Q

Topics

2

Safety precautions

2

Installation tips

3

Getting started

5

Screen assembly

12

Wall mounting

15

Screen cleaning

15

Product support

Safety precautions

The screen frames may be sharp. Hold the
parts carefully to avoid possible personal
injury or damage to the floor/product.

Never fold the screen material. Avoid
any scratches or wrinkles on the screen
material.

Make sure the wall for screen mounting
is stable enough to support the weight of
your ambient light rejecting (ALR) screen.

To protect the screen, always wear gloves
before touching or moving the screen
material.

Installation tips

Fix all screws halfway so you can make
adjustments easily. Tighten all screws after
adjustments.

Fix screws halfway Tighten after adjustment

Use appropriate tools to fix different
screws.

L

M

2

R

Q

Safety precautions Getting started Screen assembly Screen mounting

1

3

1

, and order of

Note

• In the illustrations of this document, steps to complete a task are numbered with
installation is marked with

• Items in the package are labeled and mentioned by English letters.

• Illustrations in this document are for reference only. The actual content may vary by the product
supplied for your region.

.

Getting started

Prepare the installation space. It should be at least 450 cm x 260 cm with a blanket to protect your floor.

1

177.16” (450 cm)

102.36”
(260 cm)

Blanket for protection

Open the package. Start with reading the installation guide. Do not roll out the screen material yet.

2

Installation
Guide

Most of the package contents are inside the rolled screen material. Take package contets out. Be

careful not to fold or scratch the screen material.

Installation
Guide

3

Safety precautions Getting started Screen assembly Screen mounting

Check all package contents.

4

All package contents

C C

H

A

G
E

D IF BB FI D

E

G

C C

K

L

M

N

O

A

H

x 30 P x 4 U x 2

x 24 Q x 2 V x 8

x 26 R x 1 Level x 1

x 26 S x 2

x 1 T x 2

J

Installation

Guide

Installation
Guide

x 1

4

Screen assembly

Box contents for screen assembly

No. Name Picture Quantity

Safety precautions Getting started Screen assembly Screen mounting

A Long inner frame

B Short inner frame

C Bracket

D Long fiberglass rod

E Short fiberglass rod

F Long edge trim

G Short edge trim

H Long outer frame

I Short outer frame

J Center support bar

K M5 x 10 screw

4

2

4

2

4

2

4

4

2

1

30

L M4 x 4 screw

M4 x 60 screw with washer and

M

spring

N Nuts

O Screen material

P Corner sleeve

Q 3mm hex wrench

R Phillips screwdriver

S Gloves

24

26

26

1

4

2

1

2 pairs

5

Safety precautions Getting started Screen assembly Screen mounting

1. Inner frame assembly.

3

C C

2 2

A

B

C C

2 2

3

A

1 3

J

4

B

31

1

A

K

A

Connect the left and right parts of the long
inner frame (A). Fasten them with three M5x10
screws (K).
Complete the inner frame assembly of two
long sides.

2

Insert the bracket (C) to the short inner frame

C

K

(B). Fasten them with two M5x10 screws (K).
Complete the inner frame assembly of two
short sides.

B

6

Align the short inner frame (B) with the brackets (C) on both ends to the long inner

3

frames (A) together. Fasten them together with M5 x 10 screws (K). Follow the
illustrations to install the other short side and make the inner frame a square.

A

B

Safety precautions Getting started Screen assembly Screen mounting

B

A

Align the center support bar (J) to the screw holes on the upper and lower inner

4

frames. Fasten the center support bar (J) with M4 x 4 screws (L).

A

K

J

L

A

The inner frame is a square now. Leave it aside and free the space for screen material

5

installation.

7

L

Safety precautions Getting started Screen assembly Screen mounting

1

2

D & E

O

D & E

F & G

O

2. Screen material installation.

Wear the gloves (S) to protect the screen surface.

Roll out the screen material together with the protection of the supplied nonwoven

sheet carefully. The front side of the screen material is facing downwards. It should
be protected by the protection sheet at all times. Do not remove the UP sticker from
the back of the screen material. You will need the indication of the right screen
direction during installation.

How-to video

Screen assembly

4

G

3

E

4

3

F FD D

3

4 4

UP

E

G

3

O

Insert the fiberglass rods (D & E) through the
openings on the screen material edges. Follow
the illustration to complete the long and the short
sides.

4

3

4

3

3

4

Snap the edge trims (F & G) to the screen material
edges to hold the screen material and the
fiberglass rods together. Follow the illustration to
complete the long and the short sides.

8

While the screen material is still placed and facing downards on the floor, place the assembled inner

UP

6

N x 4

5

frame gently on top of the screen material. Adjust the edge trims (F & G) so they are alignted with the
inner frame on the same side.

Insert nuts (N) to the edge trims as illustrated. Insert the number of nuts to each side as specified in the

illustration. That will be 8 nuts on each long side, and 4 nuts on each short side. Slide the nuts evenly to
align with the screw holes inside each inner frame as illustrated by the circles.

Safety precautions Getting started Screen assembly Screen mounting

N x 8

UP

Flip the trims back towards the inner frame.

7

UP

N x 8

N x 4

F & G

N

O

N

F & G

O

9

Safety precautions Getting started Screen assembly Screen mounting

1

UPUPUP

1 2 12 18 23111724

4 3 9 19 22102021

13

7

8

14

16

6

5

15

Fix the inner frame with the edge trim using the M4 x 60 screws (M). The screws should be fixed from

8

the screw holes inside the frame all the way out to the nuts just inserted into the edge trims. Follow the
order specified in the illustration to complete fixing 24 screws. Start from the middle of each side (as

~ 24) in order to stretch the screen material properly.

Note

indicated by

A standard set of M4 x 60 screw (M) comes with a
screw, a washer and a spring. Check and remove the
cap before use.

Lift the screen material and the frame carefully without touching the screen surface. Check if the screen

9

material is properly stretched.
To adjuist the stretch, work from the screws.
Once the adjustment is done, lay down the screen gently facing downward again (with the protection of
the supplied nonwoven sheet). Secure all screws.

10

3. Outer frame assembly.

1 2

H

3

P

UPUPUP

I I

+

Safety precautions Getting started Screen assembly Screen mounting

3

P

1 2

+

3

1 2

+

1 2

P

H

Align the outer frames (H & I) to the inner frame.
Fasten the frames with M4 x 4 (L) screws. There will be 6 screws for each long side and
3 screws for each short side.

L

1 2

+

3

P

+

2

1

UP

Attach the corner sleeves (P) to the frame corners to complete the screen assembly.

3

P

Screen assembly is complete. Proceed with wall mounting.

11

Safety precautions Getting started Screen assembly Screen mounting

Wall mounting

Box contents for wall mounting

Note

The supplied M5 x 40 screws (V) are for screen mounting on a solid concrete wall only.
For other wall materials, you need to prepare appropriate rivets or screws separately.

No. Name Picture Quantity

T Mounting bracket

U Spring screw

M5 x 40 screw and anchor

V

(for solid concrete walls only)

Additional tools for wall mounting

• BenQ TV projector • Tape measure (purchased separately)

• BenQ TV projector installation guide • Level (supplied)

• Screwdriver with 8mm drill bit
(suitable for your wall material, purchased
separately)

• Pencil (for marking the screw holes, purchased
separately)

• Stud finder (optional, purchased separately)

2

2

8 sets

1. Decide the screen height.

Check the installation guide of your BenQ TV projector to find out the proper image size and the recommended
projector placement, including the screen height information. As indicated in the following illustration, the

height of the screen bottom comes from image bottom - TV stand surface distance (4) and TV stand height
(5). The values vary according to your needs. You are recommended to power on the projector and get to

know the desired screen height by the projected image.

100"

Installation
Guide

1

TV projector

installation guide

4

3

1

2

4

12

5

5

3

2. Installing mounting brackets and spring screws.

Now you know the distance from the floor to the screen bottom from the previous step. Follow the

1

illustration below to line up the mounting brackets (T) and spring screws (U). Mark where you want to
drill the screw holes.

• The supplied M5 x 40 screws (V) are for screen mounting on a solid concrete wall only. Make sure

Note

you have the right screwdriver and screws for your wall material before drilling.

• You might need a stud nder (purchased separately) to help locate the proper screw holes for mount-
ing.

87.2” (221.4 cm)

Safety precautions Getting started Screen assembly Screen mounting

49.0” (124.5 cm)

19.7” (50 cm)

18.7” (47.5 cm)

42.9”

(109 cm)

18.9”

(48 cm)

47.2” (121 cm)

2 2

T

3 3

U

3.5” (9 cm)

Floor

(6.5 cm)

T

U

2.6”

Wall

100"
projection
screen

2

Use a level to ensure that the screw holes for
mounting brackets (T) are aligned horizontally
before drilling.
Each mounting bracket (T) should be fastened
by two M5 x 40 screws (V). If you might need to

V

V

3

V

V

adjust the screen height, fix the screws to the
center of slots as illustrated.

Use a level to ensure that the screw holes for
spring screws (U) are aligned horizontally before
drilling.
Each spring screw (U) should be fastened by two
M5 x 40 screws (V) screws. If you might need to
adjust the height, fix the screws to the center of
slots as illustrated.

13

Safety precautions Getting started Screen assembly Screen mounting

3. Hanging the screen.

Wear the gloves (S) to protect the screen surface.

1

Hold the screen frame with the UP sticker on the upper part of the screen and the rear side facing

2

towards the wall. Attach the bottom of the screen to the spring screws (U) fixed on the wall.

While the bottom of the screen is attached to the spring screws (U), lift the screen up a little bit from

3

both sides so you can put the upper part on the mounting brackets (T). Hold the screen frame carefully.
Avoid any finger pressure on the screen surface.

UP

3

UP

2

Wall Wall

Check if the screen is mounted properly. Hold the screen from both sides and slide it up and down gently.

4

If it is stable, the screen mounting is complete.

14

Screen cleaning

Clean the screen surface once every two weeks. Wipe the screen surface gently with a wet lint-free, non­abrasive cloth. Avoid using any liquid, aerosol, alcohol, or glass cleaners.

Product support

Should you need assistance, visit Support.BenQ.com for local product support.

PDF

User
Manual

Safety precautions Getting started Screen assembly Screen mounting

Support.BenQ.com

Online Manual

SNS21

Product Support

15

安全注意事項

K

Q

主題

16

安全注意事項

16

安裝訣竅

17

準備開始

19

布幕組裝

26

牆面安裝

29

布幕清潔

29

產品支援

安全注意事項

準備開始

布幕框架可能很銳利。請小心握住組裝零件，
以免可能造成人身傷害或損壞地板 / 產品。

請確認用於布幕安裝的牆面足夠穩固，能
夠承受抗光幕 (ALR) 的重量。

請勿折疊布幕。避免布幕上出現任何刮痕或
皺紋。

為了保護布幕，在接觸或搬動布幕之前，
請務必戴上手套。

布幕組裝

安裝訣竅

將所有螺絲固定一半，以便輕鬆進行調整。
調整後鎖緊所有螺絲。

將螺絲固定一半 調整後鎖緊

布幕安裝

使用適合的工具固定不同的螺絲。

L

R

16

M

Q

安全注意事項

1

3

注 意：

• 在本文件的插圖中，完成任務的步驟用

• 包裝內的物品用英文字母標註和提及。

• 本文件中的插圖僅供參考。實際內容依各地產品供貨不同而有所差異。

編號，安裝順序用 1 標記。

準備開始

請準備至少 450 公分 x 260 公分的安裝空間，並請鋪設毯子以保護地板。

1

177.16"（450 公分）

102.36”

（260 公分）

打開包裝後，請先參閱安裝指南，先不要攤開布幕。

2

保護毯

準備開始

Installation
Guide

大部分包裝內容物都在捲起的布幕內。請取出包裝內容物，並小心不要折疊或刮傷布幕。

Installation
Guide

布幕組裝

布幕安裝

17

安全注意事項

檢查所有包裝內容物。

4

所有包裝內容物

H

A

C C

G
E

準備開始

D IF BB FI D

J

E

G

C C

K

布幕組裝

L

M

N

O

A

H

x 30 P x 4 U x 2

x 24 Q x 2 V x 8

x 26 R x 1 水平儀 x 1

x 26 S x 2

x 1 T x 2

安裝指南

Installation
Guide

x 1

布幕安裝

18

布幕組裝

布幕組裝的包裝內容物

編號 名稱 圖片 數量

安全注意事項

A 長內框

B 短內框

C 托架

D 長玻璃纖維桿

E 短玻璃纖維桿

F 長飾邊

G 短飾邊

H 長外框

I 短外框

J 中心支撐桿

K M5 x 10 螺絲

4

2

4

2

4

準備開始

2

4

4

2

1

30

L M4 x 4 螺絲

M 含墊圈和彈簧的 M4 x 60 螺絲

N 螺帽

O 布幕

P 角套

Q 3 公釐六角扳手

R 十字型螺絲起子

S 手套

24

26

26

1

4

2

1

兩副

布幕組裝

布幕安裝

19

安全注意事項

1. 內框組裝。

3

C C

2 2

A

1 3

B

準備開始

C C

2 2

3

A

J

4

31

B

1

A

K

連接長內框 (A) 的左右部分，並使用三顆
M5x10 螺絲 (K) 固定這些部分。

請再完成兩個長邊的內框組裝。

布幕組裝

A

2

將托架 (C) 插入短內框 (B)，並使用兩顆 M5x10

C

B

K

螺絲 (K) 固定這些部分。
請再完成兩個短邊的內框組裝。

布幕安裝

20

請將短內框 (B) 與兩端的托架 (C) 對準長內框 (A)，並使用 M5 x 10 螺絲 (K) 將這些組裝

3

零件固定在一起。按照圖示安裝另一個短邊，組成一個方形的內框。

A

B

安全注意事項

B

A

將中心支撐桿 (J) 與上下內框上的螺絲孔對齊，並使用 M4 x 4 螺絲 (L) 固定中心支撐桿

4

(J)。

A

K

準備開始

布幕組裝

J

L

A

即可完成方形內框。請將內框放在一邊，並騰出可安裝布幕的空間。

5

21

L

布幕安裝

安全注意事項

1

2

D & E

O

D & E

F & G

O

2. 布幕材料安裝。

戴上手套 (S) 保護布幕表面。

操作視訊

小心地攤開布幕和隨附的不織布保護層。將布幕的正面朝下，並務必使用保護層進行

保護動作，也請勿撕下布幕背面的 UP 貼紙。在安裝期間，請按照正確的布幕方向指
示來進行安裝。

準備開始

布幕組裝

4

G

3

E

4

3

F FD D

3

布幕組裝

4 4

UP

E

G

3

O

將玻璃纖維桿 (D 和 E) 插入布幕邊緣的開口。按照
插圖完成長邊和短邊。

4

3

4

3

3

布幕安裝

4

將飾邊（F 和 G）卡到布幕邊緣，將布幕和玻璃纖
維桿固定在一起。按照插圖完成長邊和短邊。

22

布幕朝下靜置在地板上時，將組裝完成的內框輕輕放在布幕上。調整飾邊（F 和 G），以便與同一側的內

UP

6

N x 4

5

框對齊。

安全注意事項

如圖所示，將螺帽 (N) 插入飾邊。並按照圖示的螺帽數量，對每側都插入螺帽。每側長邊有 8 個螺帽、短

邊有 4 個螺帽。請均勻滑動螺帽，以便與每個內框內的螺絲孔對齊，如下圖圓圈所示。

N x 8

N

F & G

朝內框翻轉飾邊。

7

UP

UP

N x 4

N x 8

F & G

N

O

準備開始

O

布幕組裝

布幕安裝

23

安全注意事項

1

UPUPUP

1 2 12 18 23111724

4 3 9 19 22102021

13

7

8

14

16

6

5

15

使用 M4 x 60 螺絲 (M) 固定含飾邊的內框。螺絲應該從內框的螺絲孔一直固定到剛插入飾邊中的螺帽。

8

按照圖示的順序完成 24 顆螺絲的固定。從每邊的中間開始（安裝順序如
布幕。

~ 24 所示），以便適當展開

注 意：

一組標準的 M4 x 60 螺絲 (M) 規格由一顆螺絲、一個墊
圈和一個彈簧所組成。使用前請先檢查後再取下外蓋。

準備開始

請小心提起布幕和框架，並注意不要接觸到布幕表面。檢查布幕是否適當展開。

9

若要調整展開的幅度，請調整螺絲。
調整完成後，再次將布幕朝下輕輕放下（請使用隨附的不織布保護層進行保護），並固定所有螺絲。

布幕組裝

布幕安裝

24

3. 外框組裝。

3

P

I I

UPUPUP

安全注意事項

1 2

H

+

3

P

1 2

1 2

+

+

3

P

1 2

+

H

將外框（H 和 I）與內框對齊。
使用 M4 x 4 (L) 螺絲鎖緊框架。每個長邊將有 6 顆螺絲，每個短邊將有 3 顆螺絲。

P

1 2

+

3

準備開始

L

2

1

UP

將角套 (P) 連接到框架角以完成布幕組裝。

3

P

布幕組裝已完成，請進行牆面安裝。

布幕組裝

布幕安裝

25

安全注意事項

3

牆面安裝

供牆面安裝的包裝內容物

注 意：

準備開始

隨附的 M5 x 40 螺絲 (V) 僅用於將布幕安裝在實心混凝土牆面。
對於其它牆面材質，需要個別準備適合的鉚釘或螺絲。

編號 名稱 圖片 數量

T 吊掛托架

U 彈簧螺絲

M5 x 40 螺絲和塑膠膨脹管

V

（僅適用於實心混凝土牆）

2

2

8 組

供牆面安裝的額外工具

• BenQ 投影電視 • 捲尺（另購）

• BenQ 投影電視安裝指南 • 水平儀（隨附）

• 使用 8 公釐鑽頭的螺絲起子

（適用於牆面材質，需另購）

• 鉛筆（用於標記螺絲孔，另購）

• 螺柱探測器（選配，另購）

1. 確定布幕高度。

參閱 BenQ 投影電視的安裝指南，瞭解適合的影像大小和建議的投影機放置位置，包括布幕高度資訊。如下圖
所示，布幕底部的高度來自影像底部 - 電視櫃表面距離 (4) 和電視櫃高度 (5)。這些數值將根據您的需要

而變化。建議您開啟投影機電源，透過投影影像瞭解所需的布幕高度。

布幕組裝

100"

Installation
Guide

1

投影電視
安裝指南

4

3

布幕安裝

5

5

1

2

4

26

2. 安裝吊掛托架和彈簧螺絲。

現在您已從上一個步驟知道從地板到布幕底部的距離有多少，請按照下圖對齊吊掛托架 (T) 和彈簧螺絲

1

(U)。並標記好需要鑽螺絲孔的位置。

• 隨附的 M5 x 40 螺絲 (V) 僅用於將布幕安裝在實心混凝土牆面。在鑽孔之前，確認您有適用於牆面材

注 意：

質的正確螺絲起子和螺絲。

• 您可能需要螺柱探測器（另購）協助找到適合的螺絲孔進行安裝。

87.2” (221.4 cm)

安全注意事項

49.0” (124.5 cm)

19.7” (50 cm)

18.7” (47.5 cm)

42.9”

(109 cm)

18.9”

(48 cm)

47.2” (121 cm)

2 2

T

3 3

U

3.5” (9 cm)

地板

(6.5 cm)

T

U

2.6”

牆面

準備開始

100" 投影
布幕

布幕組裝

2

使用水平儀確認吊掛托架 (T) 的螺絲孔在鑽孔前
是否水平對齊。
每個吊掛托架 (T) 應該由兩個 M5 x 40 螺絲 (V) 固
定。如果您可能需要調整布幕高度，請如圖所示，
將螺絲固定到插槽的中心。

V

3

V

V

使用水平儀確認彈簧螺絲 (U) 的螺絲孔在鑽孔前
是否水平對齊。
每個彈簧螺絲 (U) 應該由兩個 M5 x 40 螺絲 (V)
固定。如果您可能需要調整高度，請如圖所示，

V

將螺絲固定到插槽的中心。

布幕安裝

27

安全注意事項

3. 懸掛布幕。

戴上手套 (S) 保護布幕表面。

1

握住布幕框架時 UP 貼紙要位於布幕的上半部，且背面朝向牆面。將布幕底部連接到固定在牆面的彈簧螺

2

絲 (U)。

布幕底部連接到彈簧螺絲 (U) 時，從兩側稍微向上提起布幕，以便將上半部放在吊掛托架 (T) 上。小心握

3

住布幕框架。避免用任何手指按壓布幕表面。

牆面 牆面

3

準備開始

UP

UP

2

布幕組裝

檢查布幕是否正確安裝。從兩側握住布幕，輕輕上下滑動。如果穩定，布幕安裝即已完成。

4

布幕安裝

28

布幕清潔

每兩週清潔一次布幕表面。用沾濕的非研磨性無絨布輕輕擦拭布幕表面。避免使用任何液體、氣溶膠、酒精或
玻璃清潔劑。

產品支援

如果您需要協助，請造訪 Support.BenQ.com 尋求當地產品支援。

PDF

User
Manual

安全注意事項

Support.BenQ.com

線上手冊

SNS21

產品支援

準備開始

布幕組裝

29

布幕安裝

BenQ.com

© 2023 BenQ Corporation.

All rights reserved. Rights ofmodication reserved.

4J.JNJ01.001_V1.00