All other logos, products, or company names mentioned in this
document may be the registered trademarks or copyrights of their
respective companies, and are used for informational purposes only.
Disclaimer
BenQ Corporation makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and
specically disclaims any warranties, merchantability or tness for any
particular purpose. Further, BenQ Corporation reserves the right to
revise this publication and to make changes from time to time in the
contents hereof without obligation of BenQ Corporation to notify
any person of such revision or changes.
Screen images and icons in this manual are simulated for illustrative
purposes only. Actual displays may vary.
BenQ is not responsible for the content of the websites or of similar
resources, which are maintained and controlled by third parties, that
may be linked from this product. Providing links to those websites or
to similar resources does not mean that BenQ makes any warranty
or representation to their content by expression or by implication.
Any third party content or service preinstalled in this product is
provided “as is”. BenQ does not, by expression or by implication,
make any warrant to the content or to the services provided by third
parties. BenQ does not warrant or guarantee that the content or
services provided by third parties are accurate, effective, most up-todate, legal, or complete. Under no circumstances shall BenQ be liable
for the content or services provided by third parties including their
negligence.
Services provided by third parties may be terminated temporarily or
permanently. BenQ does not warrant or guarantee that the content
or services provided by third parties are in good condition at any
time, and is not liable for the termination of the said content and
services.
In addition, BenQ is not involved in any transactions you conduct in
the websites or similar resources maintained by third parties.
You should contact the content or service providers for any questions, concerns, or disputes.
iEnglish
Package Contents
Digital Projector
Quick Start Guide
• QCast Mirror
HDMI wireless
dongle
• Mirco USB
cable
• Quick start guide
Product Overview
HDMI Connector
LED Indicator
USB Port
(for power supply)
* Press this button or enter the Advanced Setting to switch
2.4G/5G Wi-Fi.
2.4/5G Wi-Fi Switcher*
1English
Operation Instructions
Connecting the dongle to your projector
Depending on your device’s operating system, different
installation procedures and setup are required. Read this
document and on-screen instructions (if provided) carefully.
1
Micro USB
2
HDMI
2English
3
DC 5V/1A
4
HDMI
Source
3English
Mirroring the content from your device
For SmartPhone/Tablet
• iOS
1
4English
2
5English
• Android
1
2
6English
For Desktop/Laptop Computers
• Mac OS
1
2
7English
• Windows OS
1
2
8English
Advanced Settings
Connect SSID/Password and open web browser in your
device to link to http://192.168.203.1
• Language: sets the language for Advanced Settings page.
• Password: changes the Wi-Fi password for the projector.
• 2.4G/5G: selects 2.4G or 5G Wi-Fi.
• Resolution: sets the output resolution.
• Upgrade: updates to the latest rmware (Please note
that this function requires internet connection).
• Reset to default: returns all settings to the factory
preset values.
• Restart System: reboots QCast Mirror Dongle.
*Please restart QCast Mirror Dongle after settings are
changed.
9English
Product Specications
Model NameQP20 - QCast Mirror HDMI Wireless Dongle
Dimensions84 x 11 x 32 mm (W x H x D)
Input TerminalsMicro USB
Output Terminals HDMI 1.2
Weight30g approx.
Wireless Standard IEEE 802.11a/b/g/n/ac
SecurityWPA/WPA2
LEDBlue LED indication for Power and Wi-Fi
Output
Resolution
Frequency Band 2.4G/5G (default setting)
ColorWhite
CPUAM8252
DRAMDDR3 128MB
NAND128MB
PowerDC 5V/1A, through Micro USB port
Video supportMax. 1080p@30p video decode
status
1280x720 @60hz1920x1080 @24hz
1920x1080 @30hz
System Requirements
PCWindows OSWindows 8.1 and later with Miracast support
Tablet/
SmartPhone
5G Wi-Fi only supports Band 1 (5.150-5.250GHz).
sion quality depends on Wi-Fi environment and mobile
devices compatibility from different brands. For further
information, please visit: // www.benq.com/
*Mirror Screen support depends on Wi-Fi
module and graphics chipset.
Mac OS Mac OS X 10.11 and above with Mirror
Screen support
*Recommended Models: Mac Book series and
iMac series after E/2015
iOSiOS 9.3 and later with Mirror Screen support
Android Android 4 above with Mirror Screen support
Windows
Windows Phone 8.1 and later with Mirror
Phone
Screen support
Transmis-
10English
Regulatory Statements
Note: Not all models are available in all regions. If certain safety regu-
lations are required for specic region, BenQ ensures that products
available in that region are complied with the requested regulations.
FCC statement (for the United States only)
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modications not expressly approved by the party re-
sponsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator &
your body.
This product is compliant to implemented RoHS (Restriction of
Hazardous Substances ) type regulations worldwide, including but not
limited to China, India, Japan, Korea and European Union.
IC statement (for Canadian users)
This Class B digital apparatus complies with Canadian ICES-3 (B).
Cet appareil numérique de la classe A est conforme à la norme NMB3(B) du Canada.
The device complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions (If the product
within RF function):
1) this device may not cause interference and
2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Ce dispositif est conforme a la norme CNR-210 d’Industrie Canada
applicable aux appareils radio exempts de licence. Son fonctionnement
est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas
produire de brouillage prejudiciable, et (2) ce dispositif doit accepter
tout brouillage recu, y compris un brouillage susceptible de provoquer
un fonctionnement indesirable.
DECLARATION OF CONFORMITY
The device complies with the requirements set out in the Council
Directives on the Approximation of the Laws of the Member States
relating Electromagnetic Compatibility (2014/30/EU) and Low Voltage
Directive (2014/35/EU) and Radio Equipment Directive (2014/53/
EU), the Restriction of The Use of Certain Hazardous Substances in
Electrical And Electronic Equipment Directive (2011/65/EU), and Turkish EEE Directive.
WEEE
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union
This symbol on the product or on the packaging indicates
that this can not be disposed of as household waste. You
must dispose of your waste equipment and/or battery by
handling it over to the applicable take-back scheme for
the recycling of electrical and electronic equipment and/
or battery. For more information about recycling of this
equipment and/or battery, please contact your city ofce,
the shop where you purchased the equipment or your
household waste disposal service. The recycling of materials
will help to conserve natural resources and ensure that
Battery
it is recycled in a manner that protects human health and
environment.
Recycling information: See http://www.benq.com/support/recycle for
details.