QP20 –
QCast Mirror HDMI Wireless Dongle
Quick Start Guide Brief
Shipping Contents
• QCast Mirror HDMI Wireless Dongle
• Micro USB cable
• Quick Start Guide
Confidential. © BenQ Corporation, all rights reserved.
Product Overview
HDMI Connector
2.4/5G Wi-Fi Switcher*
* 5G Wi-Fi is default setting, please press this bottom or enter Advanced Settings page to switch Wi-
Fi settings.
Confidential. © BenQ Corporation, all rights reserved.
How to Setup
(step by step)
- Plug Mirco USB cable into QCast Mirror
- Plug HDMI as signal output to Projector
- Plug USB type A (5V/1A) with Projector for
Power supply
- Select HDMI Source on Projector, then
Standby page will be shown
Confidential. © BenQ Corporation, all rights reserved.
How to Display
(step by step
)
Airplay
- Search SSID on Wi-Fi list of device and connect
- Enter Password to finish pairing QCast Mirror and device
- Click Airplay function embedded in your device
- Select QCast Mirror SSID to start projection
Miracast
- Click Miracast function embedded in your device
- Select QCast Mirror SSID to start projection
Confidential. © BenQ Corporation, all rights reserved.
Confidential. © BenQ Corporation, all rights reserved.
Advanced Settings
Open your browser to link http://192.168.203.1
• Language: Setting language for Advanced
Settings page
• Password: Change Wi-Fi password
• 2.4G/5G: Select 2.4G/5G Wi-Fi as default
• Resolution: Setting output resolution
Confidential. © BenQ Corporation, all rights reserved.
• Upgrade: Latest firmware upgrade (Please
noted this requires internet connection)
Specification(1)
Weight
g approx
QCast Mirror HDMI Wireless Dongle
Model Name QP20
Color White
Wireless
Standard
Frequency
Band
CPU AM8251@500Mhz
DRAM DDR3 128MB
Flash NAND Flash 128MB
Output
Resolution
I/O HDMI 1.2
Power
Consumption
IEEE 802.11a/b/g/n/ac
2.4G: 2.412GHz ~ 2.462GHz
5G: 5.180GHz ~ 5.240GHz(Default Setting)
1280x720 @60hz
1920x1080 @30hz
1920x1080 @24hz
Micro USB for DC 5V/1A
2.4/5G Wi-Fi Switcher (Only can operate 2.4GHz or 5GHz band at one time)
2.4G(20M: 240mA; 40M: 220mA)
5G(20M: 300mA; 40M: 270mA; 80M: 260mA)
Working
Temp.
Dimension 84 x 11 x 32 mm (Not include HDMI connector)
Confidential. © BenQ Corporation, all rights reserved.
0~50°C
30
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation i
(1) This device may not cause harmful interference, and
(2) This device must accept any i
Warning: Changes or modifications not expressly approved by the party responsible for compliance could vo
equipment.
NOTE: This equipment has been te
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructi
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipmen
interference by one or more
Reorient or relocate the receiving an
Increase the separation between the equipment and receiver.
Connect the equipment int
Consult the dealer or an experienced radio/TV technician for help.
nterference received, includin
sted and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
of the following measures:
tenna.
o an outlet on a circuit different from that to which the receiver is connected.
s subject to the following two conditions:
g interference that may cause undesired operation.
id the user's authority to op
ons, may cause harmful interfere
t off and on, the user is encouraged to try to correct the
erate the
the FCC Rules. These
nce to radio
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
minimum distance 20cm between the radiator & your body.
forth for an uncontrolled environment. This equipment should be
installed and operated with
Specification(2)
System
Requirement
PC
Windows OS
Windows 8.1 and later with Miracast support
*Miracast support depends on WiFi module and graphics chipset.
Mac OS
Mac OS X 10.9 and above with AirPlay Mirror support
*Recommended Models: Mac Book series and iMac series after
E/2013
Tablet/SmartPhone
iOS
iOS8 and later with Airplay Mirror support
Android
Android 4 above with Miracast support
WindowsPhone
Windows Phone 8.1 and later with Miracast support
*For further information, please see more on official website:
http://www.benq.com/
Confidential. © BenQ Corporation, all rights reserved.
Loading...