Benq PB9200 User Manual

PB9200 Digital Projector

Ceiling Mounting Guide

Welcome

Copyright

Copyright 2004 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any
means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of
this company.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ
Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof
without obligation of this company to notify any person of such revision or changes.

Safety Instructions

1. Follow the instructions in this guide when installing the projector with this bracket. Improper or inadequate
installation could cause the projector to fall and cause injures.

2. Make sure the installation is secure enough to bear the weight of all and withstand vibrations.

3. Use only the parts provided with the bracket, and any parts (commercially available) that are specified in this guide.

4. Do not modify the bracket or the parts provided with the bracket.

5. Do not use damaged parts. If any parts become damaged, contact your dealer.

6. All bolts and screws must be tightened securely.

7. Make sure not to block any ventilation openings when installing the projector.

8. Do not install the projector in a location that is subject to high levels of dust or humidity.

9. Do not install the projector in a location that is exposed to direct sunlight or in a location that is subject to extreme
fluctuations in temperature (such as near an air conditioner).

10. Clean only with a dry cloth.

11. Special techniques and experience are required when installing the projector with this bracket. It is recommended
that you contact your dealer to install the projector for you.

12. Once the projector is installed, safety checks should be conducted on a regular basis.

Table of Contents

Packing Parts List ............................................................................................................................................................................3

Projector Installation and Throw Distance Chart .........................................................................................................................4

Installing a Projector with The Ceiling Bracket.............................................................................................................................5

Adjusting the Ceiling Bracket .........................................................................................................................................................8

Specifications and Diagrams ........................................................................................................................................................10

2 Copyright

Packing Parts List



U-PLATE



CEILING ADAPTER



M4 SCREWS x 4



TUBE

Names of Parts

TUBE BOLTS x 2



NUTS x 4



PIPE



SQUARE TUBE



ADJUSTMENT ASSEMBLY



PROJECTOR ADAPTER



M3 SCREWS x 4



M6 SCREWS x 4



BOLTS x 7 (TUBE BOLTS x 2, L – ADJUST
BOLT x 2, TUBE BOLTS x 2)

U - PLATE

CEILING ADAPTER

M4 SCREWS x 2

TUBE

L-ADJUST BOLTS x 2

TUBE BOLTS x 3

M3 SCREWS x 4

M6 SCREWS x 4

NUTS x 4

TUBE

SQUARE TUBE

M4 SCREWS x 2

ADJUSTMENT ASSEMBLY

PROJECTOR ADAPTER

Packing Parts List 3