LU9235 / LX9215
Digital Projector
Installation Guide
English
Table of Contents
Notice ..................................................................................................... 3
Laser notice .................................................................................................................... 3
Cooling notice ................................................................................................................ 4
When edge blending ...................................................................................................... 4
Product information ............................................................................. 5
Packing content .............................................................................................................. 5
Specication ................................................................................................................... 5
Terminals ........................................................................................................................ 6
Installation ............................................................................................. 7
Lens ................................................................................................................................. 7
Projection table .............................................................................................................. 7
Lens shift range .............................................................................................................. 9
Projector dimension ............................................................................. 11
Lens dimension ...................................................................................... 12
Remote control ..................................................................................... 13
RS232 command ................................................................................... 14
RS232 pin assignment .................................................................................................... 14
2016/ 4/ 18
2
Notice
Laser notice
This symbol indicates that there is a potential hazard of eye exposure to
CLASS 3R LASER PRODUCT
This Laser Product is designated as Class 3R during all procedures of operation.
LASER LIGHT - AVOID DIRECT EYE EXPOSURE.
Do not point laser or allow laser light to be directed or reected toward other
people or reective objects.
Direct or scattered light can be hazardous to eyes and skin.
There is a potential hazard of eye exposure to laser radiation if the included
instructions are not followed.
laser radiation unless the instructions are closely followed.
English
Caution – use of controls or adjustments or performance of procedures other than
those specied herein may result in hazardous radiation exposure.
Laser Parameters
Wavelength 450nm - 460nm (Blue)
Mode of operation Pulsed, due to frame rate
Pulse width 1.34ms
Pulse repetition rate 120Hz
Maximum laser energy 0.698mJ
Total internal power >100w
Apparent source size >10mm, at lens stop
Divergence >100 mili Radian
3
English
Cooling notice
Ventilation
Air inlet
Air inlet
Air outlet
Caution for installation
For proper ventilation of the projector, make sure to leave some space around the projector as
shown in the illustration below:
• Table
50cm
above
50cm
above
70cm above
• Ceiling • Stacking
30cm above
Mar. 2015/2015⸜03㚰
Minimum 100mm
When edge blending
• To avoid the image shaking or some pixels in the display may be misaligned, do not use the
projector in the following location:
• In a building close to a construction site.
• In a room where an air conditioner unit is working and it vibrates.
• In a place where the temperature changes dramatically that may cause thermal contraction.
• Before making any adjustment, leave the projector lit for at least 15 minutes after its light source
is turned on. This allows the internal temperature of the projector to stabilize.
4
Product information
Packing content
English
Projector with anti-dust cap
Digital Projector
Installation Guide
Installation Guide
Specication
Projection system
Native resolution 1920*1200 pixels, 16:10 1024*768 pixels, 4:3
Brightness 6000 Lumens 6000 Lumens
Light source Laser diodes
Power consumption 650Watts (Normal mode)/ 530Watts (Eco mode)
Dimension 470 x 220.5 x 519.5 mm
Weight 24 kg (without lens)
Remote control
Power cable
LU9235 LX9215
DLP Single 0.67 WUXGA
DMD Chip
Batteries
VGA cable
User manual CD
DLP Single 0.7 XGA
DMD Chip
Note:
• The brightness is supplied by standard lens, the value will depends on lenses.
• The brightness output will vary depending on each units and actual usage.
5
English
Terminals
• MONITOR OUT
Connection to other display equipment for concurrent playback display.
• PC
15-pin VGA port for connection to RGB, component HD source, or PC.
• HDBaseT
For connection to RJ45 Cat5/Cat6 cable to input uncompressed high-denition video (HD).
• DVI-D
Connection to DVI source.
• HDMI 1
Connection to HDMI source.
• HDMI 2/MHL
Connection to HDMI or MHL source.
• LAN
For connection to RJ45 Cat5/Cat6 Ethernet cable to control the projector through a network.
• USB 1.5A
Support 5V/1.5A output.
• 3D SYNC OUT
Connection to 3D IR sync signal transmitter.
• VIDEO
Connection to a video source.
• SERVICE
Maintenance exclusive port for authorized maintenance personnel only.
• RS-232
Standard 9-pin D-sub interface for connection to PC control system and projector maintenance.
• PC 2 (R/Pr, G/Y, B/Pb, H, V)
Connection to RGB or YPbPr/YCbCr output signal with BNC type input terminal.
• AUDIO IN (L/R)
Connection to an audio input source via an audio or audio L/R cable.
• AUDIO OUT (L/R)
Connection to a speaker or headset.
• AUDIO IN
Connection to an audio input source via an audio cable.
• WIRED REMOTE IN
Connection to remote control for wire remote control.
Caution:
Make sure the port is valid before inserting a wired remote controller. The remote controller may be damaged in
case of an invalid port, e.g. a wired remote controller is connected to trigger output.
• WIRED REMOTE OUT
Connection to another projector.
• 12V TRIGGER
3.5mm mini earphone jack, employs 200mA display relay to provide 12(+/-1.5)V output and short circuit
protection.
6
Installation
Lens
Model Lens Type Part Number Throw Ratio Lens Shift
LS2ST3 Wide x 5J.JDH37.002
LS2ST1 Wide zoom 5J.JDH37.011
LS2SD2 Standard 5J.JEN37.001
LS2LT1 Semi long 5J.JDH37.032
LS2LT2 Long zoom 5J.JDH37.041
Projection table
Projection Image
Image Height
Diagonal
XGA: 0.81
WUXGA: 0.778
XGA: 1.14-1.347
WUXGA: 1.1-1. 3
XGA: 1.6-2
WUXGA: 1. 54-
1.93
XGA: 2-3
WUXGA: 1.93-2.9
XGA: 3.11-5.18
WUXGA: 3-5
h
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
Vertical: -15%-55% (WUXGA), -10%-50% (XGA)
Horizontal: -5%-5%
English
Image Hight
h
h
O
h
A
A
Image Width
Projection Distance
• LX9215
Lens Wide Zoom
(LS2ST1)
Throw ratio 1.14~1. 347 1.6~2
Diagonal Image Width Image Height Offset (A) O Distance Distance
Wi de/ Te le Wide/ Tele Wide Tel e Wide Te le
(Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m)
80 2.03 64 1.63 48 1.22 0.0 0.000 24.0 0.610 73 1.85 86 2 .19 102 2.60 128 3.25
100 2.54 80 2.03 60 1.52 0.0 0.000 30.0 0.762 91 2 .32 108 2.74 128 3.25 160 4.06
120 3.05 96 2.44 72 1.83 0.0 0.000 36.0 0.914 109 2.78 129 3.28 154 3.90 192 4.88
150 3.81 120 3.05 90 2.29 0.0 0.000 45.0 1.143 137 3.47 162 4 .11 192 4.8 8 240 6 .10
200 5.08 160 4.06 120 3.05 0.0 0.000 60.0 1.524 18 2 4.63 216 5.47 256 6. 50 320 8.13
300 7. 62 240 6.10 180 4.57 0.0 0.000 90.0 2.286 274 6.95 323 8.21 - - - -
400 10.16 320 8.13 240 6.10 0.0 0.000 120.0 3.048 - - - - - - - -
Lens Semi Long
(L S 2LT1)
Throw ratio 2~3 3.11~5.18 0.81
Diagonal Image Width Image Height Offset (A) O Distance Distance Distance
Wi de/ Te le Wide/ Tele Wide Tel e Wide Te le NA
(Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m)
80 2.03 64 1.63 48 1.22 0.0 0.000 24.0 0.610 128 3.25 192 4.88 19 9 5.06 332 8.42 52 1. 32
100 2.54 80 2.03 60 1.52 0.0 0.000 30.0 0.762 160 4.06 240 6 .10 249 6. 32 414 10.53 65 1.65
120 3.05 96 2.44 72 1.83 0.0 0.000 36.0 0 .914 192 4.88 288 7. 32 299 7. 58 497 12 .6 3 78 1.98
150 3.81 120 3.05 90 2.29 0.0 0.000 45.0 1.143 240 6 .10 360 9.14 373 9.48 622 15.79 97 2.47
200 5.08 160 4.06 120 3.05 0.0 0.000 60.0 1.524 320 8.13 480 12.19 498 12.64 829 21.0 5 130 3.29
300 7. 62 240 6.10 180 4.57 0.0 0.000 90.0 2.286 480 12 .19 720 18.29 74 6 18.96 1243 31. 58 194 4.94
400 10.16 320 8.13 240 6.10 0.0 0.000 120.0 3.048 640 16.26 960 24. 38 - - - - - -
Standard
(LS2SD2)
Long Zoom
(L S 2LT 2)
Wide Fix
(LS2ST3)
7
English
• LU9235
Lens Wide Zoom
(LS2ST1)
Throw ratio 1.1~1.3 1.54~1.93
Diagonal Image Width Image Height Offset (A) O Distance Distance
Wi de/ Te le Wide/ Tele Wide Wide Wide Wide
(Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m)
80 2.03 68 1.72 42 1.08 2.1 0.054 23.3 0.592 75 1.90 88 2.24 104 2.65 131 3. 33
100 2.54 85 2.15 53 1.35 2.6 0.067 29.1 0.740 93 2.37 110 2 .80 131 3.32 164 4.16
120 3.05 102 2. 58 64 1.62 3.2 0.081 35.0 0.888 112 2.84 132 3.36 157 3.98 196 4.99
150 3.81 127 3.23 79 2.02 4.0 0.101 43.7 1.111 140 3.55 165 4.20 196 4.98 245 6.24
200 5.08 170 4 .31 106 2.69 5.3 0 .135 58.3 1.4 81 187 4.74 220 5.60 2 61 6.63 327 8 .31
300 7. 62 254 6.46 159 4.04 7. 9 0.202 87.4 2 .2 21 280 7.11 331 8.40 - - - -
400 10.16 339 8.62 212 5.38 10.6 0.269 116 . 6 2.962 - - - - - - - -
Standard
(LS2SD2)
Lens Semi Long
(L S 2LT1)
Throw ratio 1.93~2.9 3~5 0.778
Diagonal Image Width Image Height Offset (A) O Distance Distance Distance
Wi de/ Te le Wide/ Tele Wide Wide Wide Wide NA
(Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m) (Inch) (m)
80 2.03 68 1.72 42 1.08 2.1 0.054 23.3 0.592 131 3.33 197 5.00 204 5.17 339 8.62 53 1.34
100 2.54 85 2.15 53 1.35 2.6 0.067 29.1 0.740 164 4.16 246 6.25 254 6.46 424 10.77 66 1.68
120 3.05 102 2. 58 64 1.62 3.2 0.081 35.0 0.888 196 4.99 295 7. 5 0 305 7.7 5 509 12 .9 2 79 2.01
150 3.81 127 3.23 79 2.02 4.0 0.101 43.7 1.111 245 6 .24 369 9.37 382 9.69 636 16.15 99 2 .51
200 5.08 170 4 .31 106 2.69 5.3 0 .135 58.3 1.4 81 327 8 .31 492 12 .4 9 509 12 .9 2 848 21.54 132 3.35
300 7. 62 254 6.46 159 4.04 7. 9 0.202 87.4 2 .2 21 491 12.47 738 18.74 763 19. 39 127 2 3 2.31 - -
400 10.16 339 8.62 212 5.38 10.6 0.269 116 . 6 2.962 655 16.63 984 24.99 - - - - - -
Long Zoom
(L S 2LT 2)
Wide Fix
(LS2ST3)
Note:
• Ceiling installation must be done by a qualied professional. Contact your dealer for more information. It is not
recommended you install the projector yourself.
• Only use the projector on a solid, level surface. Serious injury and damage can occur if the projector is dropped.
• Do not use the projector in an environment where extreme temperature occurs. The projector must be used
at temperatures between 41 degrees Fahrenheit (5 degrees Celsius) and 104 degrees Fahrenheit (40 degrees
Celsius).
• Screen damage will occur if the projector is exposed to moisture, dust or smoke.
• Do not cover the vents on the projector. Proper ventilation is required to dissipate heat. Damage to the
projector will occur if the vents are covered.
8
Lens shift range
Lens shift adjustable range
The adjustable range for lens shift is tabulated below and subject to the conditions listed.
Note:
The drawings below apply to the standard lens only.
• LX9215
Desk-Front Projection
Vertical shift
Max 0.5V
1V
Height of projected image
Normal projection position
English
Ceiling Mount-Front Projection
Vertical shift
• LU9235
Desk-Front Projection
Vertical shift
Height of projected image
Vertical shift
Vertical shift
Max 0.1V
1H 0.05H0.05H
Width of projected image
1V
Shift to Left Shift to Right
Max 0.5V
Normal projection position
Max 0.55V
1V
Height of projected image
Vertical shift
Ceiling Mount-Front Projection
Vertical shift
Height of projected image
Vertical shift
Max 0.15V
Max 0.55V
1H 0.05H0.05H
Width of projected image
1V
Shift to Left Shift to Right
9
English
0.05H
Ceiling Mount Installation
C
Shift Range
C = Distance from lens to screen
Desktop Installation
Screen Top
Screen Center
0.05H
H
Screen Center
Shift Range
C
Note:
Lens Shift feature is not available to LS2ST3 (Fix Lens). This lens should be used for "zero degree"/"no-offset"
applications. See below:
C
113.5
Screen Center
H
FOR USE WITH LS2ST3 (FIX LENS) ONLY
10
Projector dimension
470 (18.50)
AIR INLET
95.0 (3.74)
113.5 (4.46)
M6x12L
60 (2.36) 175 (6.88) 175 (6.88)
AIR INLET
220.5 (8.68)
216.6 (8.52)
14.6 (0.57)
110 (4.33)300 (11.81)
English
AIR EXHAUST
470 (18.50)
525 (20.66)
519.5 (20.45)
535.65 (21.08)
11
English
Wide Fix Lens
Wide Zoom Lens
Standard Lens
Semi Long Throw Lens
Long Zoom Lens
Lens dimension
Optional Lens (Wide Fix: LS2ST3) Optional Lens (Wide Zoom: LS2ST1)
517.41 (20.37)
525.11 (20.67)
525.11 (20.67)
596.90 (23.5)
Optional Lens (Standard: LS2SD2) Optional Lens (Semi Long Throw: LS2LT1)
525.11 (20.67)
531.91 (20.94)
525.11 (20.67)
546.53 (21.51)
Optional Lens (Long Zoom: LS2LT2)
525.11 (20.67)
576.50 (22.69)
12
Remote control
English
On
KEYSTONE +/-
Up
Left
MENU
PICTURE
INPUT
AUTO SYNC
FREEZE
OVERSCAN
3D MODE
CLEAR
Numeric buttons
Off
VOLUME +/-
QUICK INSTALL
MUTE
ENTER
Right
EXIT
Down
NETWORK
ASPECT
BLANK
LAMP MODE
INFO
LIGHT
ID SET
SHUTTER
WIRE REMOTE jack
13
English
RS232 command
RS232 pin assignment
No. Serial No. Serial
1 N.C 6 N.C
2 RXD 7 Short with pin8
3 TXD 8 Short with pin7
4 N.C 9 N.C
5 Ground
12345
6789
Function Type Operation ASCII
Write Power On <CR>*pow=on#<CR>
Power
Source
Selection
Audio
Control
Audio source
select
Picture Mode
Write Power off <CR>*pow=off#<CR>
Read Power Status <CR>*pow=?#<CR>
Write COMPUTER/YPbPr <CR>*sour=RGB#<CR>
Write COMPUTER 2/YPbPr2 <CR>*sour=RGB2#<CR>
Write DVI-D <CR>*sour=dvid#<CR>
Write HDMI1 <CR>*sour=hdmi#<CR>
Write HDMI 2/MHL2 <CR>*sour=hdmi2#<CR>
Write Composite <CR>*sour=vid#<CR>
Write HDb a seT <CR>*sour=hdbaset#<CR>
Read Current source <CR>*sour=?#<CR>
Write Mute On <CR>*mute=on#<CR>
Write Mute Off <CR>*mute=off#<CR>
Read Mute Status <CR>*mute=?#<CR>
Write Volume + <CR>*vol=+#<CR>
Write Volume - <CR>*vol=-#<CR>
Read Volume Status <CR>*vol=?#<CR>
Write Audio pass Through off <CR>*audiosour=off#<CR>
Write Audio-Computer1 <CR>*audiosour=RGB#<CR>
Write Audio-Computer2 <CR>*audiosour=RGB2#<CR>
Write Audio-Video <CR>*audiosour=vid#<CR>
Write Audio-Component <CR>*audiosour=ypbr#<CR>
Write Audio-HDMI <CR>*audiosour=hdmi#<CR>
Write Audio-HDMI2 <CR>*audiosour=hdmi2#<CR>
Read Audio pass Status <CR>*audiosour=?#<CR>
Write Presentation <CR>*appmod=preset#<CR>
Write sRGB <CR>*appmod=srgb#<CR>
Write Bright <CR>*appmod=bright#<CR>
Write Cinema <CR>*appmod=cine#<CR>
Write DICOM <CR>*appmod=dicom#<CR>
Write User1 <CR>*appmod=user1#<CR>
Write 3D <CR>*appmod=threed#<CR>
Read Picture Mode <CR>*appmod=?#<CR>
14
Function Type Operation ASCII
Write Contrast + <CR>*con=+#<CR>
Write Contrast - <CR>*con=-#<CR>
Read Contrast value <CR>*con=?#<CR>
Write Brightness + <CR>*bri=+#<CR>
Write Brightness - <CR>*bri=-#<CR>
Read Brightness value <CR>*bri=?#<CR>
Write Color + <CR>*color=+#<CR>
Write Color - <CR>*color=-#<CR>
Read Color value <CR>*color=?#<CR>
Write Sharpness + <CR>*sharp=+#<CR>
Write Sharpness - <CR>*sharp=-#<CR>
Read Sharpness value <CR>*sharp=?#<CR>
Write Color Temperature-Warm <CR>*ct=warm#<CR>
Picture
Setting
Operation
Settings
Write Color Temperature-Normal <CR>*ct=normal#<CR>
Write Color Temperature-Cool <CR>*ct=cool#<CR>
Read Color Temperature Status <CR>*ct=?#<CR>
Write Aspect 4:3 <CR>*asp=4:3#<CR>
Write Aspect 16:9 <CR>*asp=16:9#<CR>
Write Aspect 16:10 <CR>*asp=16:10#<CR>
Write Aspect Auto <CR>*asp=AUTO#<CR>
Write Aspect Real <CR>*asp=REAL#<CR>
Read Aspect Status <CR>*asp=?#<CR>
Write Digital Zoom In <CR>*zoomI#<CR>
Write Digital Zoom out <CR>*zoomO#<CR>
Write Auto <CR>*auto#<CR>
Write Brilliant color on <CR>*BC=on#<CR>
Write Brilliant color off <CR>*BC=off#<CR>
Read Brilliant color status <CR>*BC=?#<CR>
Write Projector Position-Front Table <CR>*pp=FT#<CR>
Write Projector Position-Rear Table <CR>*pp=RE#<CR>
Write Projector Position-Rear Ceiling <CR>*pp=RC#<CR>
Write Projector Position-Front Ceiling <CR>*pp=FC#<CR>
Write Quick auto search <CR>*QAS=on#<CR>
Write Quick auto search <CR>*QAS=off#<CR>
Read Quick auto search status <CR>*QAS=?#<CR>
Read Projector Position Status <CR>*pp=?#<CR>
Write Direct Power On-on <CR>*directpower=on#<CR>
Write Direct Power On-off <CR>*directpower=off#<CR>
Read Direct Power On-Status <CR>*directpower=?#<CR>
Write Signal Power On-on <CR>*autopower=on#<CR>
Write Signal Power On-off <CR>*autopower=off#<CR>
Read Signal Power On-Status <CR>*autopower=?#<CR>
Write Standby Settings-Network on <CR>*standbynet=on#<CR>
Write Standby Settings-Network off <CR>*standbynet=off#<CR>
Read Standby Settings-Network Status <CR>*standbynet=?#<CR>
Write Standby Settings-Monitor Out on <CR>*standbymnt=on#<CR>
Write Standby Settings-Monitor Out off <CR>*standbymnt=off#<CR>
Read Standby Settings-Monitor Out Status <CR>*standbymnt=?#<CR>
English
15
English
Function Type Operation ASCII
Write 2400 <CR>*baud=2400#<CR>
Write 4800 <CR>*baud=4800#<CR>
Write 9600 <CR>*baud=9600#<CR>
Write 1440 0 <CR>*baud=14400#<CR>
Baud Rate
Lamp Control
Miscellaneous
Write 19200 <CR>*baud=19200#<CR>
Write 38400 <CR>*baud=38400#<CR>
Write 57600 <CR>*baud=57600#<CR>
Write 115 2 0 0 <CR>*baud=115200#<CR>
Read Current Baud Rate <CR>*baud=?#<CR>
Read Lamp Hour <CR>*ltim=?#<CR>
Write Normal mode <CR>*lampm=lnor#<CR>
Write Eco mode <CR>*lampm=eco#<CR>
Write Dimming mode <CR>* lampm=dimming#<CR>
Write Custom mode <CR>* lampm=custom#<CR>
Read Lamp Mode Status <CR>*lampm=?#<CR>
Read Model Name <CR>*modelname=?#<CR>
Write Blank On <CR>*blank=on#<CR>
Write Blank Off <CR>*blank=off#<CR>
Read Blank Status <CR>*blank=?#<CR>
Write Freeze On <CR>*freeze=on#<CR>
Write Freeze Off <CR>*freeze=off#<CR>
Read Freeze Status <CR>*freeze=?#<CR>
Write Menu On <CR>*menu=on#<CR>
Write Menu Off <CR>*menu=off#<CR>
Write Up <CR>*up#<CR>
Write Down <CR>*down#<CR>
Write Right <CR>*right#<CR>
Write Left <CR>*left#<CR>
Write Enter <CR>*enter#<CR>
Write 3D Sync Off <CR>*3d=off#<CR>
Write 3D Auto <CR>*3d=auto#<CR>
Write 3D Sync Top Bottom <CR>*3d=tb#<CR>
Write 3D Sync Frame Sequential <CR>*3d=fs#<CR>
Write 3D Frame packing <CR>*3d=fp#<CR>
Write 3D Side by side <CR>*3d=sbs#<CR>
Write 3D inverter disable <CR>*3d=da#<CR>
Write 3D inverter <CR>*3d=iv#<CR>
Read 3D Sync Status <CR>*3d=?#<CR>
Write Remote Receiver-front+rear <CR>*rr=fr#<CR>
Write Remote Receiver-front <CR>*rr=f#<CR>
Write Remote Receiver-rear <CR>*rr=r#<CR>
Read Remote Receiver Status <CR>*rr=?#<CR>
Write AMX Device Discovery-on <CR>*amxdd=on#<CR>
Write AMX Device Discovery-off <CR>*amxdd=off#<CR>
Read AMX Device Discovery Status <CR>*amxdd=?#<CR>
Read Mac Address <CR>*macaddr=?#<CR>
Write High Altitude mode on <CR>*Highaltitude=on#<CR>
Write High Altitude mode off <CR>*Highaltitude=off#<CR>
Read High Altitude mode status <CR>*Highaltitude=?#<CR>
16
Loading...