Copyright 2012 BenQ Corporation. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system or
translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of BenQ Corporation.
All other logos, products, or company names mentioned in this manual may be the
registered trademarks or copyrights of their respective companies, and are used for
informational purposes only.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any warranties,
merchantability or fitness for any particular purpose. Further, BenQ Corporation
reserves the right to revise this publication and to make changes from time to time in
the contents hereof without obligation of BenQ Corporation to notify any person of
such revision or changes.
This user manual aims to provide the most updated and accurate information to
customers, and thus all contents may be modified from time to time without prior
notice. Please visit http://www.benq.com for the latest version of this manual.
Do not hold the camera by excessive
force. Plus, be sure to protect the camera
from strong impacts.
To avoid accidental falling, please attach
the hand strap to the camera and always
hold the camera by keeping the hand
strap around your wrist.
If the battery suddenly depleted and
caused the lens fail to retract, please
carefully protect the lens to avoid
collision and insert a battery with full
power ASAP.
When the camera is not in use, always
turn the power off and make sure the
lens has retracted successfully before
storing the camera in its case. If you do
not intend to use the camera for a long
time, please remove the battery from the
camera and store the battery carefully.
Keep your camera away from sharp
objects and avoid collision.
When the camera is not in use, please
place it in a steady place. Plus, always keep
your camera away from pressure or any
other similar environment (for example,
in a pant pocket) to avoid possible
damage.
Table of Contents
Touring the camera ...................................................................... 9
Checking the package contents .................................................................9
Camera ......................................................................................................... 10
Front and bottom views ...................................................................................10
Carefully unpack your kit box and ensure that you have the following items.
User Manual
/
Quick Guide
1. User Manual or Quick Guide
2. Digital camera
3. USB cable
4. Battery
5. Hand strap
6. Software & User Manual CD
7. Pouch (optional)
8. AC power adapter
English
• All pictures, screen captures, icons, and colors used in this manual are for
illustration only. Actual and available products, accessories, as well as their
appearance may vary depending on sales region.
• If any items are missing or damaged, contact your dealer.
• Save the packaging for future shipment or storage.
10 Touring the camera
123 4
6
7
10
11 1213
859
Camera
English
Front and bottom views
1. Shutter
2. Zoom lever
3. Power button ( )
4. Self-timer LED indicator
5. Flash
6. USB / HDMI port cover
7. Strap eyelet
8. Microphone
9. Lens
10.Microphone
11.Tripod mount
12.Speaker
13.Battery/card cover
Touring the camera 11
5
6
7
1
4
3
2
Rear view
1. LCD display
2. Status LED
3. Record Video button ( )
4. Menu button ()
5. Multifunctional buttons (including a 4-way control and an button)
6. Function / Delete button ()
7. Playback button ()
• It is normal for the camera to become warm during operation especially during
video recording, because the camera casing and LCD might conduct heat.
• The LCD display on this camera is manufactured with sophisticated technology,
and more than 99.99% of the pixels on the LCD display meet standard
specifications. Yet, it is possible that less than 0.01% of the pixels on the LCD
display may have some light spots or show unusual colors. This is normal and does
not indicate display malfunction, nor will this affect the pictures you take with the
camera.
• The LCD monitor looks darker in strong sunlight or bright light. This is not a
malfunction.
• To prevent your images from being blurred while pressing the shutter, always hold
the camera steady. This is especially important when you are shooting under low
lighting conditions, under which your camera may reduce the shutter speed to
ensure your images are properly exposed.
English
12 Touring the camera
LED Indicator
IndicatorStateDescription
English
Status LEDNo lightThe digital camera is off.
Solid green• The digital camera is ready to capture
images.
• The digital camera is powering on, or is in
the power-saving mode.
Status LEDBlinking green• The digital camera cannot focus.
• The digital camera is capturing a video clip.
• The flash is charging, or USB
communication/transfer is in progress.
Self-timer LED Blinking redThe self-timer function is activated.
Battery status
IconDescription
Battery power is full.
Battery power remains adequate.
Battery power is low.
Battery power is very low. You should replace the battery
ASAP.
Preparing the camera for use 13
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera
before removing the battery.
A
B
To install the battery:
1. Release and open the battery/card cover (A).
2. Insert the battery in the correct direction by
matching the + - label on the battery slot (B).
3. Push the battery all the way down.
4. Close and lock the battery/card cover (D).
English
C
D
To re mo ve th e b at te r y:
1. Release and open the battery/card cover (C).
2. Pull the battery out.
3. Close and lock the battery/card cover (D).
Charging the battery
The battery charge status affects the camera performance. To maximize the
performance and the battery life, fully charge the battery via a wall outlet (or a
computer), and then fully discharge it through normal use at least once.
To charge the battery via a wall outlet:
1. Turn off the camera.
2. Insert the battery into the camera.
3. Open the USB/HDMI port cover.
4. Connect one end of the USB cable to the
camera.
5. Connect the other end of the USB cable
to the power adapter.
6. Plug in the power adapter to a wall outlet. The battery will start charging
immediately.
14 Preparing the camera for use
To charge the battery via a computer:
1. Turn on the computer.
English
2. Turn off the camera.
3. Insert the battery into the camera.
4. Open the USB/HDMI port cover.
5. Connect one end of the USB cable to the
camera.
6. Connect the other end of the USB cable to your computer. The battery will
start charging immediately.
• You need to follow the instructions above to ensure successful charging.
• Turn off the camera before removing the battery.
• Please fully charge the Li-ion battery before using it for the first time.
• When the battery is being charged, the status LED indicator flashes in green.
When the battery is fully charged, the status LED indicator is off.
• Use only the specified battery type. Using other types of battery may damage the
camera and invalidate the warranty.
• Ensure that the Li-ion battery is inserted into the product with correct polarity.
Incorrect polarity may damage the camera or cause fire.
• Download all pictures and remove the battery from the camera if you are going to
store the camera for a long time.
• Damage caused by the use of an incorrect power adapter is not covered under
the warranty.
• The battery may be warm after being charged or used. This is normal and not a
malfunction.
• When using the camera in a cold environment, keep the camera and its battery
warm by holding it inside your jacket or another warm protective environment.
Preparing the camera for use 15
1
2
3
4
5
Using multifunctional buttons
You can choose camera settings by pressing the 4-way control or the
button.
1. Left/Focus:
• Scrolls left in menus.
• Selects the desired focus mode. See "Selecting
the focus mode" on page 20 for details.
Up/AE/AF Lock:
2.
• Scrolls up in menus.
• Turns AE/AF Lock function on/off. See "Using
the AE/AF lock" on page 20 for details.
• Rotates an image. See "Rotating an image" on
page 52 for details.
Right/Continuous shot:
3.
• Scrolls right in menus.
• Selects the desired continuous shooting mode. See "Using the continuous
shooting mode" on page 21 for details.
Down/Flash:
4.
• Scrolls down in menus.
• Selects the desired flash mode. See "Using the flash mode" on page 22 for
details.
5.: Confirms a chosen setting.
Using an SD card
The camera comes with internal memory for storing captured images, video
clips, or audio files. You can also add an SD card to store more files.
To install an SD card:
1. Make sure the camera is turned off.
2. Release and open the battery/card cover.
3. Insert an SD card in the correct direction.
4. Close and lock the battery/card cover.
To remove an SD card:
1. Make sure the camera is turned off.
2. Release and open the battery/card cover.
3. Lightly press the edge of the memory card to
eject.
4. Close and lock the battery/card cover.
English
16 Initial setting
Before initial use of an SD card, please format the card first by pressing >
>
English
Manage Memory> / > Format> > Yes.
Initial setting
You will be prompted to set up the language and the date and time when the
camera is turned on for the first time.
Setting language
Selects the language version shown on the screen.
To select a language:
1. Press > . (Step 1 is needed only
after the initial setting is done.)
2. Press or to select
then press or .
3. Press , , , or to select the
desired language.
4. Press to set the language.
Setting date and time
When using the camera for the first time or when the battery has been removed
from the camera for a long time, you need to set the date and time. The date
and time is recorded when an image is captured.
Language, and
Polski
Română
OK
Set
MENU
To set date and time:
1. Press > . (Step 1 is needed only
after the initial setting is done.)
2. Press or to select Date & Time,
and then press or .
3. Press or to adjust the date, time,
and date format.
Press or to move to another field as needed.
4. Press to confirm the settings.
Operating the camera 17
Optical Zoom
Digital Zoom
Operating the camera
The procedure below is a general guideline for basic operation. It is particularly
useful if you are new to the camera.
1. Press to turn the power on.
By default, the camera is set to
Remember to follow the on-screen display or slide the Zoom lever to for
instructions on the scene menu (wherever available). Next, press corresponding
buttons to access and set more options. At any time, you can cancel the current
operation by pressing to return to your previous step.
2. Compose the image.
Use the
3. Press the shutter halfway to set automatic focus.
• Once the focus is set, the focus frame color will turn from white
4. Press the shutter down fully to capture the image.
5. To record video, press . The video recording automatically starts.
• While recording, use the
• Press again to stop video recording.
6. To switch to
captured images or recorded videos.
• You can press or to view other images/videos, slide the Zoom lever
Zoom lever to zoom-in/zoom-out on the subject.
(unfocused) to yellow-green (focused). If the focus frame color is red and
you press the shutter down, it might result in a blurred photo.
During zoom-in/out, by default, the sound is not recorded. To change the
setting, see "Zoom" on page 47 for details.
Playback mode, press . In Playback mode, you can view
to to zoom-in on a captured image, or slide the
to view 9-thumbnail images on the screen.
Capture mode.
Zoom lever to zoom-in/zoom-out on the subject.
Zoom lever to
English
• To switch back to
- Press the shutter.
- Press .
- Press .
Capture mode, you can do one of the following:
18 Operating the camera
English
. For best image quality, it is recommended to use optical zoom only by
keeping the magnification within and the separator.
• Flash is automatically turned off during video recording.
• During video recording, the recording time is continuous, but recording will stop
once the memory card space is full.
• At any time, you can press to turn off the camera.
• During zoom-in/out, there is a separator in the zoom bar between and
Capture mode
100
-1. 0
A
9999
12354678
1119
1817151614 13 12
9
10
P
9999
Capture mode 19
8M
English
EV
ISO
100
ItemDescriptionPage reference
1Scene mode32
2Flash mode22
3Focus mode20
4Drive mode43
5AEB21
6Number of shots available--
7Image resolution25
8Image quality44
9Video resolution31
10Wind cut31
11Face tracking43
12ISO27
13White balance26
14AE metering28
15Exposure value (EV)26
16AF area43
17Histogram--
18Battery status12
19Camera shake warning--
20 Capture mode
English
• While the shutter is pressed halfway, the shutter speed and the aperture are also
shown on the screen (not available during video recording).
• While the shutter is pressed down halfway, the AF area color changes to yellowgreen, camera shake warning (appears only if the camera itself detects possible
shaking), aperture, shutter speed and ISO setting are also shown on the screen.
Selecting the focus mode
IconModeDescription
Auto focus
Super Macro
Pan Focus
Infinity
Manual focus
To select the focus mode:
1. Set the camera to Capture mode.
2. Press to enter the focus menu.
3. Press or to select your desired focus mode.
4. Press to confirm the setting.
Adjusts focus automatically.
Used when capturing images at a close
distance.
Used when you want to capture the subjects
in a certain focus range.
Used when capturing images at long
distance.
Adjust the focus manually.
Using the AE/AF lock
The AE/AF Lock function is used to lock exposure and focus on a desired image.
To set the AE/AF Lock:
1. Set the camera to Capture mode.
2. Press both the shutter halfway and to lock AE/AF.
An icon appears on the screen indicates the AE/AF Lock is enabled.
3. Press the shutter down fully to capture the image.
Using the continuous shooting mode
Capture mode 21
IconModeDescription
Off
Burst
Hi-speed
Burst
Speedy Burst
120
Multi-shot 16
AEB
Captures a single photo at a time.
Continuously takes pictures as long as you
keep pressing the shutter. The flash is always
off in this mode.
Press and hold the shutter to take
continuous shots at 10fps (the maximum
number of photos is 10).
Use this feature to capture 60 photos with
at least 1/120 shutter speed with a press of
the shutter.
Press the shutter to take 16 shots at 30 fps
and combines them as a single photo.
Automatically takes 3 pictures with slightly
different settings in the shutter speed or the
aperture value.
To select a continuous shooting mode:
1. Set the camera to Capture mode.
2. Press to enter the continuous shooting menu.
3. Press or to select your desired continuous shooting mode.
4. Press to confirm the setting.
English
Loading...
+ 49 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.