Benq E800 User Manual
About the camera
Front / Back / Top / Bottom View
Wrist strap
loop
Flash
Self-timer LED
Left / Right View
Wrist strap loop
ENEN
Speaker
LCD
screen
Zoom Lens
Power button
Tripod
mount
Zoom Lens
Microphone
Zoom button
Playback button
Menu button
Four-way navigation
buttons
OK button
Scene button
Shutter button
Battery/SD card
compartment
©2008 BenQ Corporation. All rights reserved.
USB/AV port
DC Jack
Installing Battery and Memory Card
Inserting the battery
1. Open the battery compartment of the camera.
2. Insert the battery into the battery compartment, observing the correct polarity,
and close the battery compartment.
Inserting an SD Memory Card
1. Open the SD card compartment of the camera.
2. Insert the SD card into the memory card slot, observing the correct
orientation.
3. To remove the SD card, gently push the SD card till it pops out and then pull
out the card.
Turning the Camera On and Off
1. To turn on the camera, press and hold down the Power button. The
initialization screen is displayed and the camera is now ready to capture
photos or video clips.
2. To turn off the camera, press the Power button. The camera is powered off.
First Time Use
1. Press the Power button, a BenQ logo displays on the LCD screen
momentarily.
2. If the camera is turned on for the first time, the Language menu pops up
automatically after powering on the camera.
3. After the desired language is selected, the Date and Time menu pops up.Use
the Navigation buttons to select each field and adjust the value. Press the
OK button to confirm.
002001
EN EN
Configuring camera settings
1. The setup menu is available in any of the capture, video and playback modes.
2. Press the MENU button and select Setup. The submenu appears.
3. Use the Up/Down navigation buttons to scroll through the options and press
the OK button to enter further submenus and to confirm your selection.
Setting the Date and Time.
1. Using the Left/Right navigation buttons to select from Year, Month, Date,
Hour, and Minute field.
2. Use the Up/Down navigation buttons to adjust the correct value.
3. Press the OK button to confirm.
Setting the Language
The Language option enables you to select the language of your choice.
Capturing Photos, Recording Videos
Setting the Capture/Video Mode
1. Press the Scene Mode button to select the mode you need.
2. Press the Shutter button to capture a photograph or record a movie.
Setting the Flash Mode
Press the Up/Flash navigation button repeatedly to cycle through flash
modes.
Anti-Shake Function
This function is only available in Auto capture mode. Press the OK button
to enable the Shake Free function, and press again to disable it. An Shake
Free icon displays on the LCD screen when the function is activated.
Using the Zoom in / out Function
1. Press on the right side of the Zoom button T to zoom in on the subject and
shoot pictures with more detail. The zoom slider is displayed on the LCD
screen.
2. Press on the left side of the Zoom button W to zoom out and shoot a picture
with a wider angle
Using the Macro Function
Macro mode is designed for close-up photography and can capture all detail
even when your subject is very close to the camera. Press the Left/Macro
navigation button. The Macro icon displays on the LCD screen.
Using the Self-timer and Multi-Burst Photography
To set the self-timer/Multi-Burst mode:
1. Press the Right/Self-timer/Multi-Burst mode navigation button to
cycle through the self-timer ( or ) and burst photography ( )
options.
2. Once you have selected an option, frame and take your shot. In selftimermode, the icon will flash until the time expires and the photo is taken.
3. After taking a photo, the Self-timer automatically exit. If you want to use
these functions for the next photo, press the Right/Self-timer/Multi-Burst
mode navigation button again to activate the function.
Reviewing Photos and Videos
1. Press the Playback button to the Playback mode.
2. Use the Left/Right navigation buttons to scroll through the photos and video
clips.
004003
Loading...