Benq 5A.JJR26.10E Quick Start Guide
PointWrite
< Note >
Packing list
Prepare for setup
Environmental condition
Touch area
Touch area Touch area
Instructions for surface
Optimal interactive quality will be dependent on the selected surface condition.
It is important to choose a flat and non-reflective surface to secure the writing
performance.
Comparison of the board surface
Semi-gloss surface
Glossy surface
Glossy surface will increase the
external light intensity and
interference may happen.
Non-smooth surface
or with protruding object on the
surface.
PerformanceSurface Boardmaterial
Semi glossy/Matt
Dry erase board
Best!
The surface will eliminate
reflection intensity.
Glossy
General whiteboard
:LWKGalvanized steel
:ith Ceramic steel panel
Risk!
Interference may happen
during writing.
PointWrite Module Installation on Projector
Driver installation
When you are the first time to use this PointWrite Module, please install set-up
driver for Configuration setting.
Go to BenQ Website >> Search PW40U >> Go to “Download Page”
https://business-display.benq.com/en/findproduct/projector/accessory/
pointwrite-pw40u.html
Installation Completed
Connecting the PointWrite to PC
Configuration setting
< Memo>
Alignment instructions
Alignment view
* If the screen image is not in the center, the calibration will fail. Please make sure the
PointWrite module is attached to the projector properly.
Right side conflict Upper side conflict Left side conflict
PointWrite Calibration
PointWrite provides two kinds of calibration methods: auto calibration and
manual calibration.
Start for interactive function
After completing calibration, you can use PointWrite pen as mouse function or
launch QWrite software for writing and annotation.
Loading...